Separate names with a comma.
Some features disabled for guests. Register Today.
Teensy soft USB is troublesome with current CONTROL versions. Use IoSender
Openbuildspartstore.com > pick up a LEAD machine. Most modular, strongest, bestest machine we have. Will do router, laser, plasma, whatever. We...
Sounds like you aren't homing or homing but incorrectly. Or not using our Post as you should?
Youtube: Watch out for the "reviews" by the laser module sponsors, and add grains of salt accordingly CO2 is the one most proper machines use,...
60w to 80w CO2 Laser territory, UV lasers (diode) don't so so well in plywood. UV absorbs into organics. Resin layers in ply are inorganic,...
Opticals are logic devices, so you'd possibly need to add couple logic gates to avoid them interfering with each other. Best to direct that...
More fonts: See post #8 above or even better, learn to CAD outside your CAM: docs:software:overview [OpenBuilds Documentation] Pocket operations...
docs:software:file-errors [OpenBuilds Documentation] most likely, invalid children objects inside the SVG. Give it nice clean Path data to work...
Our profiles are just templates that populate the grbl settings form below for our machines. Read the fine print for each section. If your...
Do make sure you have $4=0 on the old one - pretty sure spinning motors by drill would have generated enough backfeed voltage to kill the drivers,...
English only please, see section 15 of the terms you agreed to during registration: Terms of Service and Rules | OpenBuilds
Did you have a backup off the old setup? If so, simply go to CONTROL > Connect to the X32 > Grbl Settings tab > Restore backup > Select the old...
Leave everything else just set SSID and Password. See docs:blackbox-x32:wifi_setup [OpenBuilds Documentation]
making it easy to reverse live/neutral, try plugging it in 180deg from current orientation
Then laptop PSU might have a short. Try on battery only. Try flipping 2-pin plug on laptop PSU in socket (Neutral Earth bonds exists, if plugged...
Spindle should be EARTHED DC GND should be a seperate domain Having a short between the two (thats supposed to be isolated from each other -...
Some GND to AC Earth short in your system that went unnoticed till your add an earthed spindle. Process of elimination to find it, then remove the...
Yes, thats how its been done for ages (grbl 1.1 implemented that scheme back in 2016-7ish already nothing new)
Y2 Switch is in parallel to Z (Can't parallel with Y else it won't know which Y was hit) - since Y moves on its own, if it sees Z trigger while Y...
You can do a standard probe on the front/left corner and enter stock dimensions quite easily to do center origin CONTROL > Probing Wizard > XYZ...
