Separate names with a comma.
Some features disabled for guests. Register Today.
Nice, but they may get lost in forum thread, best to repost as a Resource (: Resources | OpenBuilds
Very unlikely to be the motor, more likely: docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds Documentation] one of the 4 wires not making...
[ATTACH] Their block based IDE misses a couple features that would have been simpler (homing of steppers for example, or absolute position moves,...
0.25" difference 0.02" difference So, no, not (only) the endmill diameter causing your difference :) - check mechanicals, then check calibration
My initial guess would have been air pressure. Could maybe have been interverter duty cycle (was current turned up high?) (Though more about...
Not easily, at least not in a way that doesn't risk more damage. But that should just be dross, shouldn't be very tough. Might even knock loose...
Easel is somewhat proprietary so only "connects" to their controllers You can use it as a CAM like the other just export the gcode...
The behaviour is technically correct. M2 should disable the servo signal, and the servo should return to 0 position when the signal is stopped...
That's fine. We left the Shield floating per spec. The DC GND (negavtive supply) pin inside the USB socket won't be touching the PC case (or no...
Negative. Thats a link that's supposed to be there.. Some other unwanted DC GND to AC short at PC then. 2 prong plug? Try other way round. Try...
As the static spins the cup, the cup isnt really constrained well. It moves along its length as it rotates. That style of rotary is notorious
A and T shows the distortion well, look closer: Looks more like the way he has the cup mounted allows so axial movement while rotating. Static...
Correct, just like that Good old trial and error
Oh yeah thats very little Do still note that recommendation though
Check the datasheet for the exact current draw to be sure. Lots of different models in the CW3000 range too (:
Specs of the chiller? Some has compressors and do use a lot of power, depends on the exact one you got (CW3000 series is just a fan, CW5000s has a...
Not the same. He's talking about the USB drive on Interface, already referred to store for further assistance.
PS: that indicates a AC EARTH to DC GND short somewhere else in the system. Best to fix it! T|hose are typically isolated domains, a short is bad
Best to direct the Vectric specific questions to Vectric support: Contact us〡Vectric
Contact the Store via support.Openbuilds.com for assistance