Separate names with a comma.
Some features disabled for guests. Register Today.
Stepper motors have the highest holding torque at the lowest speed. That means that when they're not moving, but powered they're at their...
How do they feel when they roll on the track? If you can feel a bumping then it may translate to a cut. Personally and if this were the case, I...
I use and enjoy micromark fly cutters. They're nice and cheap at $10 + s&h. It takes a standard 1/8" HSS blank so it's economical in the long...
There's a Nook critical speed chart in the resource section. It might offer you some insight as to whether your screw will give you problems.
I would use the lathe to face and thread the part. :D
You'll have to run several straight toolpaths. You can program it yourself or figure it out with a cam program.
Yeah. It happens. Not that much, but it happens.
Here in NY it's the spring and fall that'll do it. The winter air is too dry and arid. None of this matters of you have an mdf machine in...
[MEDIA] I don't know what the maintenance schedule is. One could ask him. He seems accessible.
There are some decent mdf designs out there. Brian Oltrogge of Grunblau designs has a nice one that he has been using for a while now....
They don't bind, but as Rick mentioned they wear. I've ran into a couple of builds on the zone that used this system. Iirc they were pushing them...
The files can be found in the resource section.
This might tickle your fancy Shug. [MEDIA]
In short, Between the pc and stepper motors are motor drivers and a communication board. The pc talks to the com board, com board talks to the...
Like this? [ATTACH]
C7 should be sufficient.
1 and 2 should end up close to symetric about 3 after the preload. I believe the adjustability of 2 is a plus and minus about the distance between...
Does uccnc do tool diameter offsets yet?
As stated, This is UK only. Check the first page of the OX thread for a list of suppliers....
It's more nuanced then that. Soft limits are okay hard limits are ideal regardless of motor type.
