Separate names with a comma.
Some features disabled for guests. Register Today.
These also look like Indian naan bread. :D Until I read your post I thought you were going to etch an image in your bread. Kinda like they do with...
Welcome to Openbuilds Islander. Do you plan on doing a build of your own or are you helping your friend with his router? Joe
Add up all of the current ratings of your motors then multiply by the voltage of your supply. This will give you a safe wattage. Might I recommend...
Glad you found it. Have fun.
First try sherline mode to see if the problem disappears.
Are you using mach3?
Different cte,s too. maybe install more screws.
It most certainly is affected by humidity and barometric pressure. To say this is the cause of warpage is tough. I think the best way to approach...
hahaa. To the untrained eye this might look like some sort of torture device.
Too complicated for vertical imo. Just have the machine drill dowel holes or pilot holes into the spoiler for a strip of wood or pins and let the...
Just an idea. You could arrange the bottom corners so the end of the vertical 20 x 20 is exposed to the table surface and find some adjustable...
I'm teasing. I figured you hadn't fine tuned it plus the camera mic plus whatever it is sitting on was making it that loud. Cool that you have a...
Wow. That sucker seems noisy. It's running though. Congrats shugster. Great work! Joe
So, the build threads can be used anyway you'd like. Some finish a design and build behind the scenes on their own then publish. This saves a...
I'd add an opposing stepper and screw to the Z. I'm not a printer guy(yet), but I'm inclined to believe the opposite side will sag and/or lag...
Either or. Many have posted some snapshots for feedback prior to creating a build thread. It's okay.
If you want to check for critical failure you have to select this in the study advisor (see pic.8).
The shorter the beam the less the deflection. There is a shorter distance to the supports. If one hangs a 14lb spindle on 1500mm length there will...
Hey Royco, Cool estop! Let your electronics breath some. welcome to the forum. Joe