Separate names with a comma.
Some features disabled for guests. Register Today.
So it is a 71mm clamp, I never thought to measure it as it was together with the spindle. Printing a sleeve to adjust the size for now and either...
It is stamped OpenBuilds. One more thing about the previous owner that makes me scratch my head, he claimed to be a robotics engineer, I am just...
That would make sense, I never thought to measure it as that is the setup that came with the used CNC. Thnax
C-Beam XL with 65mm spindle and OpenBuilds 65mm mount. The spindle does not seem to be very sturdy. I can, with a small bit of force, move it....
Found it. Wiring was good. 101 Y-axis resolution was set to 19. I have no idea how but det it to match X&Z and all is good...now to solder the...
I have tried the motor sitting on the bench and the same as if on the C-Beam so I will dig into the wiring deeper. thanx for your patience
Wiring seems good, with the multimeter I have the coils ID'd and the motors do move. Both motors are on the Y axis so no spindle weight and are...
My X & Z axis work perfectly. Y Y axis did as well before I soldered in wiring extensions. Before I tear apart my solder joint, does the video...
I have 2 xPro V3 that have been upgraded to the latest GBRL 1.1. 1 Meanwell 12v 29A PSU LS-350-12 1 Weho 12V 29A PSU LRS-350-12 Looking for any...
Pulled one of the Y axis apart and the previous owner did not create a seating spot. Just one of many things he did not do. Did I mention that...
I will go back and have a look
I should add that both X & Y axis have the same issue
That link does not show the detail I am looking for. This link C-Beam Machine XLarge looks like it may but the pics are missing. The video I am...
I am doing a rebuild on a C-Beam XL , The build online seems to be missing a huge number of pictures. Is there another place I can find the build...
Thanx for re-assurance.... went with the multimeter and all is good
I have a C-Beam Machine XLarge with the high torque motors and I am sure the color coding is different than the spec sheet. Using my multimeter I...
I managed to recover both boards. I used AVRDude and an USBASP programmer . I flashed optiboot_m328pb.hex as the boot loader then...
Thank you
the original machine[ATTACH]
I picked up a FrankenCNC that I am trying to rebuild into something else. It originally had 2 C-Beams to move the table, I want to have a...