Separate names with a comma.
Some features disabled for guests. Register Today.
Fair enough, I never got a response from that form last time though, I'll try again.
Just a follow up, I never received the missing parts.
Yeah one of my main complaints with the design of this machine is the ABL's for the Y axis are unable to be adjusted once the machine is built, so...
I'll try to get a picture, it's 0.03 off, enough to make things not fit right but hard to capture! As for the type of machine, it's a openbuild...
So I'm seeing a very odd issue. When I cut a circle two "corners" are thinner than the other. It's tricky to describe but the front left and back...
Beautiful. Works like a charm, they barely get warm! Thanks again so much for the help, really appreciate it!
I do have a follow up unrelated question. What should the steppers (the NEMA 17's from the bundle) output voltage be set to? The documentation...
Oh, hah! Seems you've been one step ahead of me all along. And man, seriously, after my recent experiences...I really appreciate the help...I...
Thanks for the link! The switch was showing nothing and I got to thinking about the inside of the terminal, and sure enough it was pretty wobbly...
0.8v And I only checked the motors as a quick dirty check, I don't love cracking the case open without knowing the circuit. But yeah, 0.8v at the...
Alright...new multimeter, 24v measured at the BB , the terminals on the cable marked PSU. Hooked up a after powering it all off, powered back on,...
After a trip for batteries it appears my meter is dead, even better! I'll check the green light, the controller connects over USB and responds to...
I do but in the worlds best timing the battery is dead.
Checked the fuse, the wires seem...fine as far as I can tell, I do have another plug adapter I can hook up to it but the wire in question connects...
Yeah I dragged the other meanwell 24v PSU I have out and double checked that, I just couldn't remember if it was normal or not but yeah it is. I...
Yes it does and yes I did, the very first thing I did after taking the PSU out of the box was to flip it to 115.
Sadly no nothing appears to work, I can connect to the controller with the software, and it responds to commands, but the controller itself never...
Yea, I tried Lead Machine and C-beam. For reference the physical frame this is hooked up to is a Mill Right Carve King, lead screws on all axis,...
I ordered the bundle, and the BB came pre-built, but I've taken the cover off and snapped a pic.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Yeah I didn't expect a response this weekend, just, super bummed...I've rechecked the wiring, the powercase, the red light on the logo of the...