Separate names with a comma.
Some features disabled for guests. Register Today.
Looks like you are well on your way with the speed controller project Robert. :thumbsup: Tweakie.
@CubeSpawn, Very interesting project, thanks for sharing. :thumbsup: Do you have any videos of a CubeSpawn machine in action ? Tweakie.
I eventually got enough funds to upgrade from V-CarvePro to Aspire and it is just brilliant and so easy to use. I have, on occasions, used...
Excellent article by C.J.H. - explains the setting-up and operation of the Mach3 PWM very well. :thumbsup: Just out or curiosity Robert - what is...
When running Mach3 with a Kernel speed of 25kHz you can choose (more or less) any pulse repetition frequency for the PWM signal of between 5 Hz...
6.3 mm is the max. shank size my router will take (although I may be able to fit a larger size collet - I have never found the need). Tweakie.
Nice work @Bobnet - they do make for a very neat looking build. :thumbsup: Tweakie.
Just thinking out loud... The Mach3 PWM output will have an amplitude that matches the TTL standard used by the parallel port - some will be to...
:D (Perhaps not so necessary for a small diameter router bit but ‘soft start’ is much kinder to the motors brushes / windings on higher mass...
I must be the only one who reads this thread :D 3 mm and 6.3 mm. Tweakie.
As Robert has said, the emergency stop button should cut all power to the machine and it's associated equipment (spindle etc.). From experience,...
Hi Gray, To be honest, I am really not sure but I doubt you would find any advantage in using a 16mm (as opposed to 8mm) for the Z axis. It is...
Hi Charles, Welcome to the group :) You have come to the right place - here we have lots of build's information and many people only too willing...
:D:D:D Tweakie.
:) Tweakie.
I don't have one myself (I use a Bosch, when required) but the Kress has the highest router reputation here in the UK. Thanks for posting the...
That's what I like to see Brian - a nice clean shop (totally unlike mine) :thumbsup: You certainly have an excellent helper there ;) Tweakie.
Hi Gray, From the UK there are no problems buying direct from China (via the bay) but be prepared that anything with a value exceeding £15.00 is...
Correct - Right Hand thread :thumbsup: Tweakie.
@chip_breakin You are correct, the TR8*8 is 8mm Diameter, 8mm Lead, 2mm Pitch, 4 Start, Acme thread form. Tweakie.
