Separate names with a comma.
Some features disabled for guests. Register Today.
Not really, no. You could set up your job in your cam software at an angle, but your cam software would normally assume that you had set your...
The probe just identifies a corner and sets that as the XYZ workplace coordinates system zero. So no, it won't compensate for the workpiece not...
If you mean Openbuilds Cam, it's an online app - you don't download it as such. docs:software:openbuilds-cam [OpenBuilds Documentation] Alex.
Sorry about the delay in getting back to you - had to check what size my steppers are - they are 175oz/in. I do a fair bit with aluminium, mostly...
As @Peter Van Der Walt said - in Vectric you save the toolpath as a g-code file (use this post processor docs:software:vectric [OpenBuilds...
If I've read the datasheet right, at 16x microstepping you will benefit from the drivers ability to use interpolated microstepping, meaning you...
Donald, it really does sound as though you have emi causing the blackbox to think you have hit a limit switch (as @Peter Van Der Walt suggested...
Best solution to emi problems is always to identify and remove the source. If you have mains (or worse - vfd or spindle) wiring close to and...
The only silly question is the one you didn't ask. :) Alex
We need a lot more info to be able to help - to start with what controller, stepper drivers and control software are you using and what machine do...
Your feedrates in the Fusion file are all low, so nothing there that I can see. Your g-code file only contains 9 operations. There are G0 moves...
Fusion file also please. You can export a Fusion archive file to your computer and upload it from there. Alex.
If the forum won't let you upload a g-code file just rename it to a *.txt file, and please upload your Fusion file also. Alex.
First check the wiring to the stepper motor that's not working - those symptoms are often caused by a connection coming loose or a wire breaking....
Peter has answered the second part of your question. Re the controller, it depends what your interests are. If you want an easy setup and are...
Openbuilds control will not be compatible with any of the Duet boards I'm afraid - the Duet uses its own control interface which is written as a...
The link below explains grbl settings (for changing max speeds for example) I have to agree with @Peter Van Der Walt (even though I don't have one...
At least you have one of the earlier workbees from Ooznest with a full complement of wheels - later ones have less wheels and there are more...
Is homing working correctly? Alex.
It's in your preferences in Fusion. Scroll through step 2 in the link above and it shows you where to find it. Alex.
