Separate names with a comma.
Some features disabled for guests. Register Today.
Regardless of what cam workflow you use, setting up machine to use m3 for tools and m8 for coolant is just smart. When driving any car do you...
Lots of folks think Spindle upgrade long long before investigating machining strategies. Fast feed rate low/constant force HSM for the win.
3 Flute Surfacing Bit running on a RoutER11 CNC Kit (; just saying
Try...
HTD-5? or 5M-25?
We have a couple? 3GT (GT2-3M) Timing Pulley - 20 Tooth and GT2-2M Timing Pulley - 30 Tooth If its not our belt, what do you need? Match our...
Did you remember to enable Laser Mode ($32) in Grbl Settings? Grbl v1.1 Laser Mode and $30/31 correctly set (Defaults of $30=1000 and $31=0 will...
Unfortunately I am unable to assist, we prefer you work with Support to get the best experience possible, in light of previous rounds of...
Please contact support for assistance. Support > New ticket. Thanks
Then check that Grbl Settings agrees
Hard to confirm from the small pic but - X and Y switches at Axis Minimums (ie front, left) as per the video? - Didn't change $23 Homing Dir...
2.2kw is overkill for an aluminum framed CNC. 0.8kw is enough, 1.5kw is already Plenty spare. Frame has to resist the horse power you intend...
Yes, instead of a kind of select all approach, you as operator can setup toolpaths in any order you need by going at it in the order you need...
Different system, same concept Bearings constrain the leadscrew lengthwise in the actuator, coupler just transfers rotational forces to spin the...
Exactly
Incorrect See Grbl v1.1 Configuration - should be default of 0.002. Don't change advanced settings
Same team different endpoints :) We replied to your ticket 68769 too. Thanks, lets avoid duplication together :) But yes essentially compatible,...
That sounds like EMI (:
Try an aircut (Zero Z high) without the spindle as a test. Also try the other USB (maybe the freebie is failing)
