Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks, but its missing the power supply side pictures also requested
Yeah no worries Is the correct process for now Hopefully some time next week, issue with one of our certificate providers cannot build...
It is, so lets check that first for you. Can you post pictures of how you have the PSU wired to the BlackBox (both ends) and pictures of the PSU...
Then not related to the thread you posted in (4X specific issue). Moving your posts to a new thread For X32 connection issues, see the...
BlackBox 4X or X32?
Just to rule out the firmware so maybe without Y2 and with squaring firmware vs normal firmware? I believe its more likely wiring unless there...
Test with the standard firmware just to eliminate it? Still the Reset? How is Y2 wired?
The inputs themselves are hard to damage are you sure? Shorting V+ to GND (causing the reset) is more likely to damage voltage regulator / cause...
We appreciate the "spam" (: - keep attention on it - I for one can't wait for some free time to play with it.
See my reply
Its not, it literally reset the controller. Looks like a wiring mistake / short shorting V+ to GND when the switch closes. The can damage the...
Well if the machine is accurate, that might not be the case or might be it. If the machine is fine, and file is perfect - it would be...
BlackBox X32: To disable Z homing, just set set $44=3 and $45=0 in the Grbl Settings
Use a longer distance. 100mm is just a sample value (good for our smallest minimill) but type in a larger number and do calibration over a long as...
Duplicate of ticket 68628. Please continue with the store, it avoids the need for duplicate replies on multiple platforms. Thanks
Once. Unless something changes (accidentally reloaded machine profile or messed around in settings?) Run it to check if its off in the first...
BlackBox does not support Encoders. However there is no "calibration every time" - calibration = correcting for mechanical tolerances - you can...
CONTROL > Wizards and tools menu > Calibration menu > Calibrate all axes [MEDIA]
Without wiring pics we can't confirm. But keep in mind they need at least 6v (so run them off PSU) - BUT BUT BUT some of them do float at supply...
V1.0.378 will help with the issue, but can't release it at the moment - issues with the certificate authority access, waiting on accounts to help...
