Separate names with a comma.
Some features disabled for guests. Register Today.
""
BlackBox provides the industry standard 0-10v signal. Rest can be found in VFD manual, or from your VFD vendor. Make sure to either go with a...
Ours are 3v 1.7a. Stepper driver controls voltage. Might run a little hotter than our motor. Turn current all the way down. Minimum is 1.2A
Probably flex in that 3D printed float. Put a marker on the Z axis (plate before the flimsy bit) and draw some shapes, see if the issue is...
Can fit a 4ft sheet, but not cut all the way to the edge. This allows some edge to clamp on. Can do 8ft length with Vectric Tiling by sliding...
Its a very simple device. SIG = the magnet, GND = plate. Multimeter in continuity mode to check. When magnet touches plate, SIG = connected to...
Or wired. Nothing like a runaway jog because the wireless mouse dropped signal just as you let go of a jog button. CNCs create EMI, wireless does...
The preview is usually accurate, so if it looks wrong, the gcode probably is wrong. Post the gcode for review. Otherwise welcome to zoom 3D view...
Checkout the Travel/Working Area column of docs:machines:comparison [OpenBuilds Documentation] Yes. Lots of holddown options. We sell T Tracks...
As always CONTROL is meant for our primary customer base: beginners, needing a easy to use and understand host. Typically with a BlackBox and...
Rewired relay from NC to NO? An NO relay would need power to stay closed
No betas at this time. Vectric used rarely for this (Vectric is a 3-axes CAM, not a 4th axes. Wrapping is still 3 axes) most 4-axes users go for...
CONTROL uses streaming, doesn't make use of the SD at all. Mounting it for use with other hosts: should just be a matter of plugging it in....
Door port is an Input. Doesn't send any signals
As it seems to be exporting as 96dpi, maybe try to draw it as 96dpi if you can't find the difference in how you used to save / export
The Grbl Wiki is a must-read Grbl v1.1 Configuration For practical purposes, CONTROL > Grbl Settings tab Always good to test and configure...
That's the only controllable output. Maybe directly off the PSU then? Machine power on, is brake powered? Machine off for the night no power to Brakes
Just change $5 Limits Invert accordingly. $5=0 for NC, $5=7 for NO like our switches Just make very sure to use SIG and GND per the Important...
Coolant is 24V: docs:blackbox-x32:connect-coolant [OpenBuilds Documentation]
The shape of the circle suggests backlash during direction change. Usually that's loose shaft coupler screws. What kind of machine is it? Pics?
