Separate names with a comma.
Some features disabled for guests. Register Today.
No. They will not be the same. It'll do for a rough estimate.
I wouldn't say so. For this I think a servo is a bit overboard. I'm guessing speed isn't a concern, so a stepper is probably the most economic...
They're all over the net. Google water cooled spindle. or Chinese spindle motor. The gray HY vfds that a lot of packages have aren't the greatest....
The idea was to take the data from misumi and run through some numbers for estimates until the ob profile data is in.
Any ideas on pricing?
Misumi has some of that data on their profiles. http://us.misumi-ec.com/vona2/detail/110302683830/?Inch=0&CategorySpec=00000042733%3A%3Aa I know...
That's a loaded question (pun intended). I can calculate it for you later. I'll need to grab a CAD file for the crosssectional areas to do the...
Congratulations on your decision. The :)beam is a great machine. From a software standpoint it sounds like you're on the right path. You're...
You shouldn't see any deflection if the beam is supported at both ends.
Does it weigh 70oz or is it a 70oz-in NEMA17? o_O
32t frontwards. Cut on the push not the pull. A good rule of thumb for blade selection is 3 teeth in a row in contact with the work. You may not...
Hey Nates02gt, This isn't just an OX site. It's a DIY site. You're welcome to share with the community here any DIY'd contraption you can come up...
Good post
Dust in a box + spark = Bad. mkay. I worked in a flour mill. This was always on our minds. Safety first buddy. ;) I'm glad to see you're...
Building a machine out of mdf has never sat right with me. Yet, I can't put my finger on why. I'm working on it. Joe
I never liked the idea of springs for antibacklash mechanisms. Try a design that utilizes a solid means with adjustment for preloading. cool...
I'm Sorry. It's hard to determine the orientation you're speaking of. It may not matter. In general, I believe using any two plates will...
[ATTACH]
Ever think about two joining plates and one cast corner for some or all corners? Just a thought. Joe
Moved to 3d printers. I think the corner plates will do it for you. However, you could always order the cast angles later on.
