Separate names with a comma.
Some features disabled for guests. Register Today.
You can use mach3 and 4 on a 64bit system with a cat5 to db25. It requires a motion controller. I'm not sure what that j17 is for. Maybe for...
grbl boards not compatible with mach. trial limitations: http://www.machsupport.com/software/mach3/ system...
The UC100, plus a cheap breakout board, and cheap motor drivers will get you there. The UC100 is basically a usb to parallel port cord. I use an...
Hey Capn, About a year back I read a very long detailed post over on cnczone explaining why the combination of hardware and programming on the...
No prob. whatever you set for the cw setting set them the same for ccw. I believe the cpl and cph settings are to indicate what part of the range...
https://www.inventables.com/projects/quiet-cut-spindle-upgrade-tinyg Have you tried using tgfx for this? It should write the proper setting to...
I took mechanical and manufacturing. AC/DC Electricity and digital electronics were prerequisites for me as well as manual and CAM programming....
I wouldn't say essential. I use digital leadshine drivers with a warp9 ess. I'd say they are luxuries.
Congrats. Where did you get your degree?
The first looks like it'll work to get you moving. I'm skeptical of some info given on the data sheet though. research tb6600 and tb6560. the...
Hey Capn, Shoot for low inductance motors. A TinyG will handle the 2.8A motors. Give it a 24v supply and little fan to make it happy. Has your...
I've never had a problem with the site. Android mobile and Firefox.
Thanks. I couldn't see the file extensions on my phone.
Have you clicked on the files tab?
Hello. Welcome to the forums. Is this what your looking for?http://www.openbuilds.com/builds/c-beam%E2%84%A2-actuator-example-builds.1955/ Joe
Hello Abe, I may not be able to answer your questions, but I have a couple that may help others answer them for you. Are any of the axis slave or...
Learning. The acquisition of knowledge. Knowing is half the battle. G.I. Joe :)
Same here on the arduino Rick. I have one that I break out to play with every once in a while, but it's not my forte. I have a single stepper...
Work out your speeds and feeds. You should determine what range you need the drums to spin for the various woods you'll be using. From there start...
Do you have the drum motor?
