Separate names with a comma.
Some features disabled for guests. Register Today.
Instructions for installing the Interface are in this link; docs:interface:start [OpenBuilds Documentation] For cable management; Swing Arm Alex.
Probably DPD - they will e-mail or text you when they have it. Alex.
If it's Vectric it's a license key and download (at least it was when I bought V-carve). Alex.
Depends what the cause is - backlash in the leadscrew is inevitable, and is corrected using the nut blocks (X and Y axes) and the anti-backlash...
docs:software:vectric [OpenBuilds Documentation] If you scroll down in that link there is a screenshot of the Openbuilds post processors in the...
Over tensioning the leadscrews can do it, but I've had quite a few reports of the ball bearings supplied by Ooznest failing - the ball "races"...
Sorry to hear that, sounds like your tramming is plenty good enough though. Alex.
Depends what cad/cam software you use, but I confess I just jog back and forth (I set my max speed in my controllers config to about 1000 mm/min)...
Not quite sure what you are saying, but wcs zero is set at the centre of the bit, so if 1/2 the diameter of the bit "overhangs" the corner of the...
When you say that the machine is "grounded" do you mean its connected to MAINS earth? Have you created a connection between mains earth and DC...
I don't probe X or Y with a bit - it cannot be accurate with the single flute bits I mostly use (and has the hassle that you have to put in the...
Assuming Z is at a safe height, G91 G0 X600 (sends X 600 mm to the right from the current position - good idea to then send G90 to switch...
The normal set up with grbl is that the back, right, up corner is the maximum for each axis (that has to be so) and is also X0, Y0 and Z0 (in the...
Ooznest had done 99.9% of the work so very easy. The Rep-Rap firmware is a bit confusing to anyone used to grbl though. Alex.
Well I'm happy to try, but I use a Duet 2 on my workbee, haven't got one on a 3d printer. The Duet and the Rep-Rap firmware it uses was originally...
Haven't tried this myself, but usb to ethernet adapter should work. Have you followed Ooznest's instructions (it's easy to miss a step) - it's...
Only thing that comes to mind is your homing search and seek rates - if you are hitting the switch hard? Alex.
Sounds as though your nut blocks may be a bit stiff (they often are when new) - I usually recommend using a battery drill to grip the leadscrew...
Steel V-wheels are not a great idea on aluminium extrusions - the aluminium will suffer badly. Alex.
The stutter is what you see when it is losing steps - its the symptom rather than the cause. Alex.
