Separate names with a comma.
Some features disabled for guests. Register Today.
That is unlikely to be accurate - have a read of the pdf file I attached above. Alex.
Openbuilds Control has a wizard for calibration. I don't use it myself as I don't have a grbl machine, but shout out here if you can't find it. Alex.
What controller/control software are you using. You might be able to get it better by calibrating your steps/mm - I'll attach a pdf that explains...
English please.
Sorry Peter, we have been through that on Facebook. As far as I can tell David's problem seems to be that it just doesn't do the pull off in the X...
Hi @David Kater, you just saved me the trouble of suggesting that you ask here :D Anticipating a question from one of the experts here, can I...
@protozach, are you able to identify the part of the log immediately before it stopped moving? (assuming that happened a bit before the lines you...
I'll take your word for it that the Z C-beam is moving (couldn't see that on my phone) but I'm fairly sure that the spindle is moving relative to...
That really is almost always a wiring issue - it could even be a problem caused by the vibration of the machine moving around or a wire being...
Exactly what I was going to suggest - physical distance between a possible source and low voltage wiring is the best precaution against emi. Alex.
What are you using - router or spindle with vfd? And how have you arranged the wiring to it? What you describe sounds very much like a "false...
INTERFACE CNC Touch Let's you control your blackbox without a PC. Alex.
Won't increase your speeds, but try conventional rather than climb milling on wood - you will probably have less chatter and might (depending on...
Wheels are easy to get, and not that expensive. More wheels might overcome any dents in the extrusions (although there shouldn't be any), but...
The machine profile is not that useful in Fusion - the correct post processor is the bit that matters. I haven't set up a machine profile at all....
Limit switches - Xtension Limit Switch Kit Openbuilds Control software - docs:software:openbuilds-control [OpenBuilds Documentation] Alex.
Can't help much on the plasma side of things, but if you have a blackbox and don't want even simple "programming" (configuration) then use it for...
Which version of Ooznest's firmware have you installed? I'm familiar with the Duet2, not so much with the Duet 3 6HC, but I know some people who...
If in Fusion cam you set the origin in cam setup to the centre of your stock, and then set the workplace coordinates system zero on your machine...
