Separate names with a comma.
Some features disabled for guests. Register Today.
What toolpaths are you running? If something like a roughing, then a profile around your letters, make sure your machining allowance is set to 0...
I'll admit that most of the different flavors of rpi os are beyond me. But for what its worth, there are several using the twister os on a 4...
Yes. Until your stock moves (a new job with a different x and/or y)
No. Dont re-probe x and y. Z is the only thing that changes. Keep in mind the reason you tell the probe routine what size bit you have is so...
No. Ignore what I said. I was thinking you could invert one of the Y motors. Peter's advice is correct: Y axis jamming Sorry!
Go into grbl settings a invert one of the Y motors.
hmmm [ATTACH]
Dont type the "mm". Only input 1
I just ran a test and it worked for me. Can you explain why it didnt work? Screenshot maybe? What probing cycle were you using; Automatic or...
I have to think that it should work. They have it in their documentation.
Not really worth looking into. Was just making sure it wasnt my code or something else happening in control. I suppose instead of specifying a...
I dont have an xPro V5, but grbl_esp32 and grbl are not the same thing so no, you cant put grbl 1.1f on it. Check the xPro V5 wiki for info on...
You're probably on to something there. Lowering the feed rate to 10 dropped the average difference to in the .030mm.
I'll try it it but I'm doing it from my desk. No machine. Just an Arduino with a probe switch attached. I was just curiously really and trying...
According to grbl when I get the machine position (MPos) via ? FYI - I'm not using G10 to set anything. I'm merely probing down and then moving...
Can someone help me understand why a jog move after a probe doesnt go the programmed 5mm distance? Here's log of what I'm doing. [09:14:30] [...
I got it working! I had everything wrapped in document.ready. Once I removed that, it worked.
Its in your machine setup, but its not selected in your nc program settings. [ATTACH] Keep in mind that once you start using the OB post, you...
I just realized I posted this in the wrong thread. Sorry. I'm not sure if I completely follow, but I was just trying to add the div that...
ctrl 0 sets it back to default size. That a zero, not an o and it doesnt appear to work with the 0 on the numpad.
