Separate names with a comma.
Some features disabled for guests. Register Today.
Sometimes they are tight due to machining tolerances. Spray some dry silicone lube on the screws, disconnect the motor (important!) and attach a...
You cant rely on go to zero moving to the same place every time unless you home your machine first.
You have sideways compensation set to center. It should be set to left. Its in the passes tab. After changing to left, make sure compensation...
Why use a macro input? You can wire the Z probe together with the xyz probe. If you're going to use a switch for the Z probe, you can do...
I think you are talking about kerf width. If so, I cant reproduce your issue. Please respond with your fusion file and tell us what version of...
He explains it on his site: CNC Plasma Cutter
There's a diagram in the docs docs:blackbox:connect-plasma [OpenBuilds Documentation]
Dont know what you mean by homing test. Glad you figured it out though.
Any chance you have the switches mixed up? Homing goes Z, X and then Y. If, for example, you have the X switch plugged into the Y port and the Y...
Nothing sticks out in the grbl settings. Are you sure the limit switches are working? Have you gone into the troubleshooting tab to verify?...
Not exactly sure what you mean by x and y in one cycle, but if you want to have a custom grbl config, then you need to compile it yourself....
You need to use a valid grbl post processor. L1000 isnt a valid command.
That has tripped me up before. Thank you for confirming.
Can you confirm that you are getting this with 1.0.309. The bug was introduced in 1.0.308, but there was an attempted fix in 1.0.309. OpenBuilds...
can you post the file please
Update to the latest version. Peter changed the probing routines so they will set the current WCS. In your case you would now: Home Switch to...
Yes. That would work too. Excellent. I have another idea regarding WCS. I'll see if I can get you some sample code over on github later.
Maybe. Are you on the latest version? Peter will be able to assist in a few hours, I'm sure.
That's the problem It shouldnt move. The dro can do two things. It can either move to a position you specify or it can set your current...
But did you also change the value to 0 before clicking Shift-Enter? Edit: Just tested on my machine and it works. So either you didnt home...
