Separate names with a comma.
Some features disabled for guests. Register Today.
That happened to me once. Grub screw cam loose on the Z axis lock collar.
Once. That tells the controller that all coordinates are in inch mode until a G21 command is issue in which case it switches to mm mode. Does...
T (tool change) is not a valid grbl command. Find a post processor that is for grbl. (refer to the grbl wiki for valid commands: Grbl v1.1...
Because you have your WCS Offset set to 0 in the setup. Its just a warning that you havent set it up and that it will default to G54, If you...
Who has that anymore. I thought they've completely dumped the old dialog
I recently updated the post to utilize the new property naming and grouping features (submitting updated pull request shortly). I thought it would...
Yep. I guarantee that's what happened. The attached gcode file is fine. But if Z-0.3937 would have hit your stock at the beginning of the job...
Putting 5 for Z end is also a problem. It needs to be a negative number since its using g53 no matter what. So, even if you home correctly,...
That's part of the math. Please reread what needs to be done. Go into your grbl settings. Steps/mm are $100, $101 and $102 Read the grbl...
Yes. You can use math as Alex indicated above.
Thanks for posting this. I had started with Jacobs linear upgrade years ago on the Y. Also added 1/2" lead screws (I have the belt workbee)....
Not the exact problem you have, but I had to shim my x-gantry c beam between the end and one of the inside Y plates.
$110, $111, $112 Grbl v1.1 Configuration ยท gnea/grbl Wiki
check your max feed rate in the grbl settings
Its all a guess. Without seeing what's actually going on I cant say for sure. Maybe start with a smaller version of a 3d carve using the same...
Also, its clear that you moved the model within the workspace, or more likely changed the stock size, and didnt regenerate the toolpaths. Before...
Not sure why you have it, but your last 3D finish pass (3D Finish 2) is 3/4" offset from the rest of the model. Maybe when you posted the...
Okay, but you still need to compare where the machine thinks it is, to where the gcode file says it should be. Post your vcarve file if you...
Clearly this is a tough one to figure out since it seems to be random, but let me go through some thoughts and see if we can narrow this down a...
Try changing the move type. I often use point to point.
