Separate names with a comma.
Some features disabled for guests. Register Today.
Boolean for grbl, Mask for GrblHAL 7 = 1+2+4 (x+y+z)
Note symptoms in section 1 of docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds Documentation]
Trials doesn't allow export. Works fine though and really worth the price, one of the best CAMs there is. Only one other free option for 3D but...
BlackBox provides the industry standard 0-10v signal. Rest can be found in VFD manual, or from your VFD vendor. Make sure to either go with a...
See comprehensive FAQ docs:blackbox-x32:faq-usb-connection-failed [OpenBuilds Documentation] See docs:blackbox-x32:currentadjustment [OpenBuilds...
Use Power Supply Wire For both use the 4-conductor option Xtension Wire By the Foot Not needed Use the 3-conductor option of Xtension Wire By...
Once is sufficient (: - David will get to you in due time, he is a volunteer. You've posted the file 3x now (:
Please include the sketchup file, possibly line segments instead of polyline?
Mpos = set by homing. 0 is at the switch's trigger point, after homing it backs away from the switch - thats the 3mm and thats fine. Wpos = set by...
Check Z steps per mm, remember to Home before setting Zero.
Click Grbl Settings tab: see $110-112 Grbl v1.1 Configuration
Or not OpenBuildsPartstore.com parts (;
Tool Enable pin > $1.50 relay module > Switch the Enable on the Driver [ATTACH] Could still use Relay 1 (just Set $16 correctly, and remember to...
If its just scaling, its steps per mm. Other problems would cause loss of position and mess up the cut more
Steps per mm calibration. CONTROL > Wizards and Tools > Calibration menu
Correct, they are not seperate anyway Most likely if its running, the spindle is still on, so run the light off the Spindle relay (SSR) PS:...
Yes, as used on the LEAD machines for example: [ATTACH]
OK so yes, NO/NC relay has since been fixed . But these are older than the change. What's your use case for the relay, perhaps we can make...
Disconnect CONTROL from the device 1) Download the attached file and extract it 2) Download xloader...
BlackBox 4X or BlackBox X32? The tools for the older one is no longer available, you would have to flash manually
