Separate names with a comma.
Some features disabled for guests. Register Today.
Did you set the current? docs:blackbox-x32:currentadjustment [OpenBuilds Documentation] [ATTACH]
Proof: BlackBox X32 on my LEAD1515 (Has a Z) Reset EEPROM (back to bare grblHAL defaults, also has a Z) Scrolls down and shows you its $44=4,...
If you select the ACRO from the list it set customfirmware="acro" OpenBuilds-CONTROL/app/js/grbl-settings-defaults.js at master ยท...
1) Used latest version of CONTROL? 2) Loaded machine profile from CONTROL > Grbl Settings tab > select machine from the list? That should have...
What controller are you running? (Hopefully X32)
You need to power cycle to clear the error (as mentioned in the text content on the page linked) Can adjust while it's off anyway, just turn it a...
Simple. Click Home All. That's it.
X- must move the tool to the left X+ must move the tool to the right Y+ moves tool toward the rear of table Y- moves tool toward the front of the...
Read docs:blackbox-x32:currentadjustment [OpenBuilds Documentation] > Fault indicator detailed in 2nd half of that page, but usually just current...
Check how you've mounted the switches? Lever micro switches are about the most precise option (Inductives are far worse for example). But it is...
@Robhoski please confirm which drivers not motors. The video sounds like cheap TB6560s to me (:
I do spot a CH340, they arent very good USB chips so that might be part of your intermittent headaches with this cloneduino. If you start running...
Mosf VFD damage comes from either - Incorrect or bad Earthing (Get an electrician to check your sockets, and let him wire up the VFD, including...
Hook up an oscilloscope watch the peaks of all the back EMF and cable inductance dumping back into the drivers at the time it switches. Learn...
Note connecting and disconnecting a powered stepper motor from its driver -even by relay - will ruin your stepper driver. Not if, but when.
1) Make sure your CONTROL is up to date (You posted in a thread about V1.0.276 from Jan 2021 - over 3 years and exactly 100 versions behind...
During a move, or during as a test? Might be the testing method? (Testing while idle vs while moving etc) No, as I said: They should work. Only...
Can shim if you want, but carriage is constrained by the wheels, leadscrew just provides motion along one axis, and if the lock collars are tight...
Using our recommended PSU will protect your warranty. Cheap PSUs can cause surges, EMI issues and damage. Might be best to resell the machine in...
Not really sure. I'd say try it and see or overspec. Just make sure overspec'ing doesn't have too many disadvantages like making it fit with the...
