Separate names with a comma.
Some features disabled for guests. Register Today.
Bearing is pushed tight into endmount by the lock collars. If loose, reset your lock collars to prevent any axial play. A little radial play...
Did you start it? If its not running yet... Also is yours up to date. Can your PC do DNS lookups? Internet up? Etc. Or skip the one click...
Alarm might not always be raised during testing (if still in earlier alarmed state won't popup again. Clear first), but if they test fine by hand,...
Only one real way : up close inspection, if needed partial teardown. Sense of touch can feel minute relative movements, smaller than the eye can...
Not sure what you mean, CONTROL is still active, last release just last week. Should be on V1.0.375 download from software.openbuilds.com
Xtensions Limits or something else?
The "version" check is for Smoothieware. It first tries autoreset then soft reset then effectively gives up trying to find a Grbl controller, and...
If you don't have a probe, then don't enable Touch off in the Toolpath options. Do watch the video though and learn the proper ways. Or even...
Probably Probe Not Z Axis? Do you have a touch off probe switch and floating torch mount? If not watch [MEDIA]
LibUSB isn't our driver, so prior to the BlackBox you had some similar device that used that driver. Proceed to uninstall LibUSB then reinstall...
Checkout our flagship, the LEAD1010 Machines - LEAD Machine - LEAD CNC Machine 1010 - OpenBuilds Part Store We have EU distributors too - check...
NEMA17, one of these Nut Plate for 8mm Metric Acme Lead Screw on a short piece of 2040, and a couple Mini V-Wheels? Similar to ACRO 1010 with...
Using AutoSquaring under http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox X32 > Y-Axis dropdown > Auto Squared X switch wires to X...
Exporting CAD as DXF (R14 Polyline) will do docs:software:file-errors [OpenBuilds Documentation] Some CADs try to be too fancy, but you can always...
See the 2nd picture on docs:blackbox-x32:connect-xtension-limit [OpenBuilds Documentation] (Scroll down) - use parallel wiring. PS: Don't guess...
Alex, no Plasmas do a Touch-off probe before every Pierce :) your information is incorrect. Every polyline / entity before it gets cut gets...
Kerf is the width of the slot the plasma cuts, usually around 0.8-1.5mm depending [IMG]
Better to include screenshots (apart from the log message, there are other clues we'd have checked for onscreen too) but at a guess without it,...
Just throwing this in here (: - BlackBox with Interface (; [MEDIA]
