Separate names with a comma.
Some features disabled for guests. Register Today.
Sorry, missed the part where you said you were using the xcontroller. Anyhow, lots of info on their site Calibrate z axis (How to?) and [MEDIA]
You should calibrate all of your axis. [MEDIA]
Spindle speed in gcode is meaningless to all of us that use a router as well. Its required.
Missing S value? Syntax is M3 S1000 1000 is your spindle speed. It can be something other than 1000 but your gcode post processor needs to...
Change the probe type to custom probe, then click on the gear icon (next to cancel button after you change probe type). Z offset is your plate...
Hey Tim - Looks like an old version of Control. Any reason why you havent updated? (btw - this question has nothing to do with your issue.)
Its giving you a link to troubleshoot. I would look take a look at it. Especially section 6.3.1. It could be that since you move the switch...
Go through the steps outline in the grbl wiki. You should end up with a hex file. Use the Firmware Flashing Tool in the Wizards menu of Control....
Look for % on the first line. If its there, delete it. If you use Control in the past, it filters that out. The interface does not.
Depending on what you mean by bling, you can modify the ui with javascript macros. I make several changes to it and with the new "run macro at...
The post has been updated for Router11, but they actually dont control the spindle speed. All they do is output text in the file that tells you...
Check your max rate settings. $110, $111 and $112 gnea/grbl
Simple solution [ATTACH]
There are several problems with that file. First line '%' shouldnt be there. Control will ignore it for you, but in general it shouldnt be...
Maybe typo when entering moved value in wizard?
I've seen posts here about twister os on pi 4 works well. OpenBuilds CONTROL Software
That is a symptom of a wire that has come loose, broken or shorting. docs:blackbox:faq-identify-motor-coils [OpenBuilds Documentation]
where did you set you stock origin in Fusion? Sound like you probed the top of the stock in the lower left hand corner, but have your origin in...
Or square the machine. I had a similar issue. Mine was due to x gantry c-beam wasnt cut square. Shimming it solved the issue. I'm still in the...
Coolant on/off gcode is M8 and M9 You can test with the Tool On / Tool Off buttons in Control. Just click on them and select Coolant On or...
