Separate names with a comma.
Some features disabled for guests. Register Today.
Did you home your machine first? I had a similar issue because I hadnt homed first
I'll be honest that I dont have any experience with grbl .9. But usually that's an indication that your machine size isnt set up correctly in...
Just to confirm, you are NOT using the usb cable supplied with the interface, correct? The manufacturer supplied power only cables, so to get it...
Now why didnt I think of that :/
The screen should be black when its in bootloader mode as per the instructions Hold the MODE button for a couple seconds more, when flashing is...
No problem.
They are wherever you backed them up to. It doesnt do it automatically. You would have had to go into grbl settings tab and clicked "backup...
Its never going to show "centered" in control because it has no idea of your stock size. I edited my previous response. Please provide more...
Those pictures are hard to see. But if in vcarve you set your x,y 0 to the bottom left corner of your stock, then it looks correct. Control is...
For alignment, I meant what way are the pieces facing when you cut them so we know what cuts were made in what direction. There's a lot that goes...
Yes. You didnt press the reset and mode buttons. The steps are here: docs:interface:firmware-update-control [OpenBuilds Documentation] Pay...
Ok, well at least you fixed a problem :) Next thing to check is backlash. We will also need to knows all the details of how you are cutting...
You can always check here: OpenBuilds/firmware
Looks like your machine isnt square.
Does it do it with all jobs now? Post your fusion and gcode files please.
I think default is 5mm. But yeah, 1 is probably way too small
What's your pull-off value ($27)? You may need to increase it in order to clear the triggered switch
So the actual problem has nothing to do with the gcode. Its just an after effect of grbl resetting during the job. I should have read the error...
The error is telling you exactly what happened. That line of code is missing a feed rate. How was the gcode generated? Please attach the gcode...
I'm using dropbox. Just post my code to my local dropbox folder, then its available at both of my machines.
