Separate names with a comma.
Some features disabled for guests. Register Today.
Ahh - no there is only the download for the latest Openbuilds post processor - option 2 says install ours, or use the built in pp's. I think you...
You said you found a post processor for an older version? Post it here and I'll have a look to see if I can see if it can be modified - depends...
Sorry - can't help much with that V7. 5 is before my time. Hopefully someone else will join in this thread. I never put a pp in "my pp" because...
Have you tried the PP I linked to? Alex.
Here; docs:software:vectric [OpenBuilds Documentation] Alex. Edit - just read your post properly the link (you have probably already found that...
The author of this has not shared the Android app. There are some links to similar projects if you read previous posts that may be of interest. Alex.
Despite your precautions emi sounds like a probable cause - have you got any mains and spindle cables well away from any signal or low voltage...
When you say "confirm wcs are correct" how do you do that? Does the dro say XYZ are all zero in the wcs when the bit is actually at workplace...
The grade they sell at Aluminium Warehouse which is machinable is 6082 T6. Alex.
Divide the dimension you told it to move by the dimension it actually moved (take several readings and use the average, excluding any that are...
On that G53 G0 Z-0.1969 is the Z axis actually touching the limit switch? Just thinking that if is touching (but not enough to trigger it) when...
Something I'd not noticed before - cutting my fourth plate, penultimate pass on the profile cut (ie last operation) and the bit came out of the...
No - it won't hurt. If you have normally open switches wire them in parallel, if they are normally closed wire them in series. Alex.
That's where I get my aluminium from, but they don't do V or T slot extrusions. Alex.
I had a good look around the last time someone asked this about 6 months ago. The best I was able to find was the carbide one, which I believe you...
Now I just need to source some 20/80 x 1000 mm and I can get on with fitting these new end plates.
Inspired by @Giarc 's lathe build I decided to add a rotary axis to my Workbee. First problem to overcome was the lack of height under the X...
Exactly the same one as Giarc I think. Alex.
