Separate names with a comma.
Some features disabled for guests. Register Today.
What control set up have you got? Are you using soft or hard limits? I ask because it looks as though the Z axis is trying to go beyond its full...
Just make sure you have routed the wire so it can't catch on the drag chain - tape it to the edge of the X gantry plate. Alex.
In case you didn't know, you can use the Duet Web Control to test the homing switches ;- 3. Testing Your WorkBee Alex.
Haven't used the controlled power off, but pause.g by default calls homeall.g - it should home Z followed by homing X and Y. Pause can fail to...
What happens when you home the machine on switch-on? Is the Z homing correctly then? If not you have a problem with the wiring to your Z homing...
What controller are you using? I'm guessing from your location and the mention of controlled power off that you have the Duet? Alex.
Ebay is probably your best source for small quantities. Alex.
Delrin by Dupont is the homopolymer. Delrin® Plastic | Acetal Plastic Alex.
Acetal. Polyoxymethylene - Wikipedia Alex.
Please post your g-code - error 33 is an invalid target position on an arc command - one of us (who knows more than me) will be able to help if we...
No - X and Y workplace zero are set at the centre of the bit - your cam software allows for the diameter of the bit when you create the toolpath....
Were you using a probe? If so don't probe X and Y with the bit - use an accurately measured rod (I use a turned 1/4" brass rod) and then probe Z...
360 miles round trip - passing the depot about half way on the first leg Alex.
Best way to learn - those lessons tend to stick. :rolleyes::) Alex.
Order with Parts Store processed (UK time) very late Wednesday, dispatched Thursday, arrived UK Friday evening. Spent the weekend wandering around...
Use the machine co-ordinates - if you just use G0 it stays in the current workplace co-ordinate system. If you put G53 at the start of the line...
Your attachment doesn't work for me @JustinTime. Alex.
Please raise this with the parts store;- Contact Us Alex. PS - I ordered the 230 V one - I hope you haven't got mine :(.
@DylanPhelps99 did you check that you have the latest version of the post processor? Alex.
What cad/cam software are you using? - there may be an easier way to set up multiple copies. Alex.
