Separate names with a comma.
Some features disabled for guests. Register Today.
The Duet 2 is not guaranteed to supply 2.8 amps - that's the maximum "after further testing", and with significant cooling. I would suggest...
Not with Vectric (which runs OK), but I've just had a very similar problem (missing dll) with Fusion 360 - I suspect Windows. Alex.
This is a rough guide for a 1/4" end mill - start a bit lower on the feedrate and increase until it sounds as though the router/spindle is working...
I am sorry, but I cannot help you, as this is not my project. Alex.
Hi Brian, I am away from home with very limited Internet - will try to give a bit more help this evening/tomorrow (UK time). If the switches are...
Just checking - jogging works correctly - X +ve moves right, Y +ve moves back and Z +ve moves up, and homing moves in the same directions - up...
OK - looks as though you have updated the firmware, but you have missed the step to upload the user interface. Follow the instructions in the link...
A couple of points for anyone reading this thread :- THIS IS NOT MY PROJECT. THE AUTHOR (@sausagePaws) HAS SHARED WHAT THEY ARE WILLING TO...
Could you please post the contents of your config.g and customconfig.g files? I assume you have the black and red/orange user interface screen,...
Not necessarily - the datum point is not always where the toolpath starts, its a reference point so your controller knows where the workpiece is...
Not so much "doing something weird" - the default In Fusion cam assumes your stock is larger than the thing you have designed - it took me a while...
That shouldn't have made a difference - are you using the Openbuilds post processor? - that would set the wcs to G54 (1) if you left the wcs...
If it's mm off it sounds as though the problem lies in your set up in Fusion cam. Post the file and one of us will be happy to have a look at it....
It will do the opposite of what it does now. X +ve should move right, Y +ve should move back and Z +ve should move up. What happens when you jog...
Here is a link where you can download the manual for your controller card. I don't know much about this controller myself, but I'd be surprised...
More info please @Kevin Hawkins - is it a copy of the workbee, is it leadscrew driven, what controller did you get with it? We try to help...
Glad to see how that worked out - well done! Alex.
I won't have time to investigate this properly until tomorrow, but found this on the Fusion forums. GRBL Multi-Axis Post Processor - Autodesk...
It will be a version 2.2 machine - there are subtle differences between the version 2.2.1 and the 2.2, but they are unlikely to matter - the...
What version is this machine? - 2.2 or 2.3 Ooznest support is usually superb, so I am surprised you are having problems with them. As I said...