Separate names with a comma.
Some features disabled for guests. Register Today.
Power supply fan will only come on when it reaches a certain temp so no issue there. Have to checked the output voltage of the power supply with...
This? 8mm T8x8 Lead Screw Trapezoidal ACME w/ Brass Nut - Custom Cut Length (up to 2000mm)
Assuming you have the BlackBox there's a few things to check. 1 - Make sure you turned on the power. (sounds obvious, but...) Also make sure you...
Okay. Going back to your original post. Fusion will remember any changes you make to your post processor settings. It will change those values...
Also, the post processor should save your settings from the last time you posted. The only time it resets is when you use a new processor file or...
Setting it to 0 should hit your limit switch. If you need that extra clearance set it to -4 or something. And I'm assuming you're doing this in...
What everyone else said. But since its your first project, it may be that you've havent calibrated your steps per mm as well.
Are you homing your machine first? You need to or it has no idea where its at and wont calculate your machine size correctly. Also, check out...
Cleaning will also reduce heat buildup and your bits will last longer. I do it between every job.
That's exactly why. I've made the mistake of putting it on the round of the collet nut (dewalt) and had the same problem.
Put the magnet on the flat of the collet nut, not the bit.
Sorry for not posting links. Wasnt sure if I should or not. I dont know.....
That would help me avoid fat finger z crashes for sure.
If you are talking about my rolling setup cart (has nothing computer related on it), you can get those files from PDX CNC. I've modified it to...
Spent a few days reworking my table to accommodate the new G700 dust processor. Fingers crossed that I dont have EMI issues. (the big white...
Sorry for the obvious answer but your options are to make your design smaller, upgrade to pro or tile your job. Everything you need to know is in...
Yep. Exactly what it says. It has nothing to do with your machine. Its a software limitation. The Pro version doesnt have this limitation.
When a job is running, the two top buttons (normally for set and goto x,y,z zero) aren't mapped to any functions. The bottom two arent mapped...
I guess I should wait until its in my hands before I suggest these things. But I'm just excited. :)
I rewatched the video and noticed no way to pause a job. You have some extra buttons available when the job is running. Will this be something...