Separate names with a comma.
Some features disabled for guests. Register Today.
@Giarc's post is here; LEAD Lathe I'm adding a rotary axis - so not a lathe. The sad part is that I'm using Fusion 360 to design the fittings I...
Alex Chambers published a new build: Adding a rotary axis to the Workbee 1010. Including height modifications to the Workbee. Read more about...
That is almost certainly a poor connection on one wire of the stepper that is misbehaving - this might help....
I should have said - I converted the text to curves when I was thinking about fixing the open vectors. Alex.
Had a quick look before bed. The text has lots of open vectors - rather than trying to find them all I used the quick engrave toolpath, 60 degree...
It's late here in the UK, but I'll try to have a look tomorrow if no-one else chips in, but an important question is what do you want the text to...
I run my Duet from a very old Win7 desktop - didn't want my main design PC in the same room as the cnc! - You could probably pick up a secondhand...
There is a micro SD card in the Duet. It the config.g file on the SD card that you need to edit. The Duet runs that file when switched on and...
Is your workbee a leadscrew machine? What size is it? Can you read an SD card? If you have an SD card reader find and edit the config.g file -...
You don't have to use YAT - I've had no issues with YAT so I'm afraid I can't recommend an alternative terminal programme off the top of my head....
The instructions for building your version of the workbee from Ooznest are here; Assembling Your WorkBee - V2.1 The instructions for setting up...
This thread started as a private message from @Bubbahub - moving it here Alex. @Bubbahub said "I am very new and very green. I have read so much...
What cam software are you using? We have some recommendations for post processors for a few different programmes :- docs:software:cam [OpenBuilds...
One thing to check with *.tap g-code is the header code - in particular some post processors that output *.tap do not include a G20 (inch) or G21...
That really does sound like one intermittent connection on the stepper motor wiring - see docs:blackbox:faq-identify-motor-coils [OpenBuilds...
By the way - you can get away with changing the axis maximum in config.g without changing homing files (not good practice but it works) if you are...
I'm still on my 1010 - never enlarged the machine. Check if you have more than one set of homing files - sometimes you have copies in the macro...
Thanks @David the swarfer - done that and updated file. Alex.
I've been working on this for @Rob Atha - beta version attached. Had to change the extension to *.txt I would be grateful if someone more...
The thing with Ooznest's firmware and the Duet is it forces you to home all axes when you switch on - so if you want to change the machine...
