Separate names with a comma.
Some features disabled for guests. Register Today.
Pretty tough plastic. Keep an eye on the flexible coupler(s) that got distorted though, in case they got weakened by the experience. Hope you get...
3mm spacers + precision shims? It's important to put the precision shims next to the nut blocks - they are slightly larger diameter than the...
Well that's good news - if there is anything wrong they'll put it right. First take the left motor and endplate off and check the end of the Y...
Hmmm - @Peter Van Der Walt's comment made me have another look - it certainly looks as though the leadscrew is not in line with the motor shaft....
Instructions from Ooznest on this bit of the assembly is to have the leadscrew touching the motor shaft - so the coupler is used as a rigid rather...
Also check that you are fully up to date with the Vectric software. If you upgraded recently to version 10.5 there have been problems with several...
Are your limit switches normally open or normally closed? Alex.
The Fusion website is a great place for tutorials - here is one to get you started. Fusion 360 Help Alex.
That's just telling you that you didn't set which work co-ordinate system you wanted to use in the cam (manufacturing) section of Fusion, and it's...
Refer to the official documentation: docs:software:fusion360 [OpenBuilds Documentation] Alex.
Finished! - I wanted to use brass screws to fix it to the wall, but the ones I had were a bit short. Didn't want to buy a box of 100 just to get...