Separate names with a comma.
Some features disabled for guests. Register Today.
MERRY CHRISTMAS TO THOSE WHO CELEBRATE IT, SEASON'S GREETINGS TO EVERYONE. Alex.
The led fade on switch off is normal - smoothed power supply has capacitor which discharges through the led and it's resistor. Alex.
As I said above @Cian Warren, the Duet does not use grbl - it uses Rep-Rap variety of g-code which has some significant differences. There are...
What sort of Z probe? The software (often a macro) for a Z probe sets the Z zero at the point where the bit touches the probe, minus an OFFSET...
Did you measure the thickness of your material? Where did you set the origin in Vectric, and did you set workplace zero in the same place on the...
I believe someone has written a post processor for the Duet and cambam - ask on the Duet forum - link below. Alex. Duet3D
The Duet uses Rep-Rap variety of g-code (similar to, but not identical to grbl) - the g-code supported by the Duet is in the link below. Alex. Gcode
I'm afraid that what you bought for $10 was a pirate copy of Aspire, not a "previous oem version". Alex.
I clean resin off with alcohol (meths) or cellulose thinners if its particularly obstinate, but looking at your piece of cherry you might now have...
I use a (actually a Chinese clone) Makita - it's bottom speed is 10 K rpm and I rarely use anything else. Try reducing the speed, keeping the...
Shine a bright light on the cutting edge of the bit - if you see a reflection the bit is blunt. You didn't mention your doc or your stepover, but...
Static probably - earth your dust hose - run a length of bare copper wire along the inside and connect it to mains earth at the end furthest from...
Thought my eyesight was playing up this morning :p:eek::jawdrop:
The only way to increase the cutting area is to upgrade to V-carve Pro - the desktop version has that size limit. Looking at your pic it might be...
I think @Rick 2.0 meant an aluminium extrusion for the spoilboard support, and maybe brackets to fix it. Alex.
You can have some of the rapid moves back if you use @David the swarfer 's latest version of the post processor for Fusion/grbl....
I've ordered my 4th axis kit (Christmas present from me to me) so I'll continue to follow your progress - impressive so far! Alex.
Either test the Z lead on a different motor, or test the Z motor on a different lead (don't forget to power off before changing any wiring). That...
From what you said - no, not a faulty motor. Z lead attached to Y motor not working means it's the lead that is faulty (almost always the problems...
What happens if you you connect your Z motor to another driver? - TURN THE POWER OFF BEFORE DISCONNECTING OR CONNECTING ANY STEPPER MOTOR. What...