Separate names with a comma.
Some features disabled for guests. Register Today.
As @JustinTime said we really need a pic, but also some information about your machine would help - what machine - belt or leadscrew drive -...
The colour coding on stepper motors is not standardised and from some suppliers (mentioning no names:rolleyes: ) have been known to supply motors...
It uses the word offset because every wcs is an offset from the machine co-ordinate system. You won't be changing where your job starts. You can...
It's just telling you that, in setup, you didn't specify which wcs to use, so it's going to use the default of wcs1 (G54). Alex. [ATTACH]
Important point here is what actuates the switch. The switch can be mounted anywhere as long as whatever operates it does so when the Z axis is at...
You are looking at the front, which is nearest the camera. Alex.
As @Peter Van Der Walt has said, but also, reading your messages literally - did you re-calculate the toolpaths with the origin set at front,...
You didn't mention it, so I'll ask - did you test the wiring from the defective motor on the good one? Alex.
Hi @Paulie Tweddell, we can't view the video - it requires us to sign in, could you attach it to a new post here please. Thanks, Alex.
Your cam software should set the spindle speed - what software are you using to create your g-code? Alex.
I'm afraid that you need to be aware there are now several "versions" of the workbee around. If it is a version 2 kit the instructions @Christian...
There is some useful information here, but readers should be aware that Ooznest's workbee design has moved on since this report was written and...
Then you need to reduce the maximum travel on your X axis - move the X axis limit switch in enough to stop the dust shoe hitting that side. Copy...
Two things that you can do - I've changed the pause.g file to call homez.g instead of homeall.g. If you want to move to a specific location create...
These are out of date - they go back to the days when Ooznest used G54 as a bodge for machine co-ordinates (should be G53) Tell me what it is that...
It won't move when homing because it thinks the Z switch has been triggered - all homing cycles home Z first so until you re-wire that switch it...
If the led on the board for the Z axis switch goes off when you touch the switch do you mean when you operate the lever or could it be you are...
I've hung the unshielded power lead for my (Chinese clone) Makita above the machine and to the front - low voltage stuff to the back of the...
Will the motor run if plugged into another axis, and will another motor run if plugged into X. IMPORTANT - only unplug or plug in motors with the...
Have you tried running the vfd from a filtered power strip? Alex.