Separate names with a comma.
Some features disabled for guests. Register Today.
Most likely its the G28 move. What software are you using to generate the gcode?
https://www.amazon.com/OrangeA-15-1500mm-2xLinear-Guideway-Carriage/dp/B072FRPGKP
Looks like they are a bit hard to find atm. But the amazon (not ebay) link has the specs. They are a common size.
Double check your set screws on the x motor pulley. Make sure they haven't come loose and that they are on the flat side of the shaft. Also make...
Sounds like you're not using our recommended grbl post processor. Try this one: docs:software:fusion360 [OpenBuilds Documentation]
Couple of things come to mind. 1 - Most common issue with doing a two sided cut this way is your stock size is off. Being off a 1/16" in y...
Set the stock to leave to a negative number. Its in the passes tab. Edit: Axial stock is what you set, not radial.
What parts did you order? I converted my Y's on my 1510 to lead screws a year ago, but I'm guessing we didnt use the same parts. Give us more...
There are a handful of grbl fusion posts out there. Some are machine specific or rather controller specific. Ooznest is one of them. The OB one...
The OB version of the Fusion grbl post takes care of that and other issues. docs:software:fusion360 [OpenBuilds Documentation]
89 seems high until you have to deal with runout on cheap collets.
Check the resources area. OpenBuilds Parts | OpenBuilds
This just happened to me with a touchscreen. Using the mouse worked flawlessly.
Just pulled my Workbee out of storage. Hasnt been fired up for over a year. Dusted it off, lubed it up, plugged it in, updated OB Control and...
This is AWESOME! I was just yesterday deciding weather I wanted to build a plasma table using the Lead machine or buy the Crossfire Pro. Was...
I've never used carbide create, but the internet is telling me that you can disable one of your tool paths, then create gcode. After that, enable...
Fusion is now adding a comment to the code if you dont have the paid version. Fix here: Life After Fusion 360
Hmmm. Its obviously a Autodesk injection. The comment looks good, so not sure why Control is complaining about it. Inspecting the gcode via...
Parts list link isn't working, but you can view it by going to the Parts List tab above.
Congrats, Team! I'm sure this question will be coming so I'll be the first to ask. Have you tested with the High Z mod?