Separate names with a comma.
Some features disabled for guests. Register Today.
Yep. Okay, now we can move on. Remember several posts back I said the first Z move will be 10mm from your Z limit switch. The only way it knows...
Are you homing or not? Its important.
It doesnt work that way. Do you have homing enabled? If so, are you homing your machine before setting 0?
That doesnt make sense. Or I should say, that doesnt add up. It would make sense if there was no retract. You need to rehome so it knows where...
" when that retracts i now have 0,0,25". If its a 25mm touch plate, then it should read 25 + whatever the retract is (I cant remember off the...
It will remember your WCS. But you need to rehome.
GRD and SIG are correct. V+ is for the limit switches with LEDs [IMG] You can put the motor on any side you want. When you get it hooked up,...
Based on that, the first move should move the cutter above the stock 15mm. This should happen regardless of where Z0 is set (stock top or stock...
The first move should be G53 G0 Z-10. That is 10 mm away from your Z limit switch. Is your stock Z0 less than 10mm away from the switch?
That message is merely telling you that you didnt specify G54 so its doing it for you.
Here's one that's not corrupt. And also the gcode file for your wasteboard using the correct processor.
Everyone has an Assets folder. Cloud assets or CAM tool libraries are missing in Fusion 360 | Fusion 360 | Autodesk Knowledge Network In any...
I just verified my instructions and they work fine. Where are you getting stuck? Dont use the built in grbl post processor.
The issue is that you're not using the correct post processor and its outputting a G28. Please go back to my previous message, follow the link to...
Please attach your gcode file to a reply. Might also be helpful to see your fusion file. If I had to guess, you have set your Z0 to the bottom...
Its not supported, but there's been some discussions on how one would go about this. Do a search for blackbox external.
The xtension switches have an LED: Xtension Limit Switch Kit
Any two wire one will work. You can even make your own. What's more important is that you have the correct code and know how to make a macro...
Yep: Z Probe Wizard
Your motor isnt wired correctly. Check this link for an explanation on how to ID your motor wire pairs and how to fix directional issues:...