Separate names with a comma.
Some features disabled for guests. Register Today.
No problem. It takes a while for sure. Then you'll forget it and have to re-learn it. LOL
Change your lead in settings. Its too steep which is resulting in tool deflection. Probably better to ramp into it. I would also suggest doing...
Post your macro
David's a genius when it comes to explaining coordinates/homing and such. Glad you made some progress. However, location of homing switches are...
Not true. I didnt read your complete post but see if this helps. Homing your machine is not the same as G53 being X0Y0Z0. For an explanation,...
Sorry, I meant limit, not probe.
That's a warning (not an error) to let you know that its going to default to the G54 work coordiate since you didnt specify a work offset. You...
The reason I suggested moving the wire to NO is because you have "invert limit pin" set to 0.
For sure. The center is good for v-bits and such. Hit me up if you have issues.
So, you're actually trying to find a corner. I'm assuming your plate looks like this [IMG] Instead of probing the hole, probe the outside...
"Center finder". I'm assuming you want to find the center of a hole? What probe do you have?
No. But you can write or find the code and add it to a macro.
Dont know much about that board and you should probably contact the manufacturer. However, you might try installing the FTDI drivers: Virtual COM...
Move your wire from the Normally Closed (NC) terminal to the Normally Open (NO) on your limit switch. OpenBuilds BlackBox 4X Documentation You...
That's what I meant. Shoot. Sorry.
According to shapeoko wiki, the Makita brushes last longer.
Use dry silicone spray on the lead screws.
Use gnea/grbl not grbl/grbl? gnea/grbl
Feel free to DM me if you run into issues again.
They still work for me.