Separate names with a comma.
Some features disabled for guests. Register Today.
Its in the BlackBox docs: OpenBuilds BlackBox 4X Documentation
I just upgraded to .194 and the your file loaded fine. @Peter Van Der Walt why is the 3D viewer disabled by default?
Regarding stock to leave, I just verified that fusion does default to a .020" stock to leave on adaptive toolpaths so you should check there...
Adaptive tool paths with these types of machines will usually run undersize due to tool deflection. Do a light finish pass after the adaptive. An...
Peter recently made a change to the 3d viewer, which may explain the error. Post your job.nc file here and we'll take a look at it. You may have...
No. And those are weaker than the on board drivers so not sure why you'd even want to.
I've started a thread on how to modify the post processor so you dont have to edit every file: VCarve OB friendly post processor: VCarve GRBL...
A few of us have done it. My conversion starts half way down the build page: Shawn's Workbee 1510 There's also a few different options to...
You can either do it in software, or swap + and - . Details here: C-Beam Machine XLarge
If you are really worried about the "green", change your lead-in and lead-out parameters.
I got lucky on that one :)
double check the power supply voltage on the 24v side with a meter. Adjust using the trim pot.
Contact Chris Laidlaw. He makes mounts for the makita. Chris Laidlaw
Right. Duh. You did say Xpro. You can use the Workbee 1010 or the Lead 1010 since all axis in those profiles are screws. You will then need to...
"Start, Hold, Rest buttons the Troubleshooting tab displays" Are you sure you are talking about the OB Control app? In any case, the BB doesnt...
Dont know much about your setup since you havent told us, but perhaps change $5 to disabled. grbl runs on the control board, not your PC....
Always good things to find in the "Resources" section. If you have a 3d printer: C-beam Machine Pen Mount But I just taped mine to the router...
Also, your problem might be your steps per/mm are set way to high on X and Y if you have belts on those axis. That would explain part of your...
When homing it will first do the Z (moves up). If it continues to move up after hitting the switch, it means your switch isnt working. You can...
You cant use that 36V power supply with the blackbox. So, pick up the 24V in the OB store while you are at it. OB Control only works with grbl...