Separate names with a comma.
Some features disabled for guests. Register Today.
Great. Are the motors energizing at all? What control software are you using?
Let me ask again. In your grbl settings, what is $4 set to? Its either 0 or 1. It needs to be set to 1 in order for the motors to move.
What is $4 set to?
Have you gone through the troubleshooting guide? Spark-Concepts/xPRO
Yep, those are the ones.
Depends on your controller. I'm going to assume its grbl based so pick grbl-mm. You might have to remove the tool call depending on what gcode...
No worries. I really like it though.
oooooo I just realized I can dismiss it since its a notice. Cool. But I still like seeing the IG posts. hmmmm
I like the new IG posts, but can you please move them to the bottom of the page? As you have seen, I'm constantly checking for new forum posts...
You may find this helpful [MEDIA]
Well, just hit us up with any questions. Also, I recently found out that the parts store can customize a machine for you. So if you want to go...
Alex has posted my change from belts to screws on the 1500mm side. However, you have two other options. 1 - stick with belts but double belt...
I have high torque motors on those axis, fyi
I used to be able to rapid at 400IPM until I switched to 1/2" lead screws. Now I rapid at around 275IPM. Cutting is a different story obviously....
Maybe at some point you loaded a profile? The 290 and 290 seems like some sort of default setting, but the grbl default is 200 and 200. @Peter...
You're getting an access denied error on the port. A quick google will walk you through how to resolve.
Nope. They were probably never set correctly in the first place.
The error is telling you that it cant find the switches. It also says that it will only go 1.5* your max travel to find them. It does this so it...
That's good to know!
The workbee 1510 is lead screw on the z and belt on the x and y. I modified mine to be belt on X and leads screws on Z and Y.