Separate names with a comma.
Some features disabled for guests. Register Today.
G1 X3 F2400 ; go back a few mm Should be;- G1 X-3 F2400 ; go back a few mm Alex.
Screenshot and console attached. Alex. [ATTACH] [ATTACH]
Will do, as the rar file doesn't seem to have uploaded after all:banghead: Alex.
Vectric - I've uploaded 2 out of the 3 files as *.crv, but for some reason it rejected the third. Not an immediate problem - I uploaded it as rar...
Thanks Peter - still had to upload one as a rar archive - got a security error (repeatedly) trying to upload the *.crv file. Alex.
When uploading project files the site says I can upload files up to 29.3 Mb, but rejects files of 5 and 7 Mb. Alex.
Ooznest's firmware only uses the switches for homing - it completely ignores them the rest of the time. On my phone at the moment and that makes...
That's because you are used to grbl. The default home position for the workbee/Duet/Ooznest firmware is RIGHT/BACK/UP and machine co-ordinates are...
A couple of bits of Vectric 3d clipart, profile cuts and pocket cuts. Straightforward project apart from having to make a jig to hold the end...
Use the swarfer post processor with Fusion - there are some issues with the grbl post processor provided by Autodesk, link below. Alex. Fusion...
You are either going to have to stick with the firmware provided by Ooznest (home UP, RIGHT, BACK - machine co-ordinates maxima) or write your own...
I'm not familiar with Carbide create, but the problem is shown in the attached pic - M0 is an unconditional stop [ATTACH] For the benefit of...
Post a screenshot of the alarm message. As soon as I can get on my PC I will have a look at your file. Alex.
This is a guess without further info, but check your Z clearance height in your cam software - the defaults often try to raise Z too far and...
Have you got your mains cable to your router in the drag chain with other wiring? If so take it out - you could be causing false limit switch...
@Donald Oehlke, this thread is specifically about using macros with the Duet controller. Could you please ask your question in the CNC...
On my phone so can't view your vid. Is left/right X or Y? Alex.
Which axis is which in your pic? Alex.
Have you checked the drive pulley fixing to the motors? With the motors powered on see if you can move the drive pulley - even a very small...
