Separate names with a comma.
Some features disabled for guests. Register Today.
That's looking impressive @Peter Van Der Walt. Alex. :thumbsup:
G53 is machine co-ordinates, so you are telling it to hit the Z stop. Alex.
That is what I was thinking, which is why I asked what sort of switches you have - if you haven't already got them have a look at the Xtension...
When you mentioned it only happened when machining plastic my first thought was EMI - hence the question about dust extraction, but your cabling...
Router or spindle? Where have you routed mains/spindle cables? Do you have dust extraction/shoe? If so have you earthed the extractor hose? What...
Not exactly a bom, but the instructions for the mechanical assembly are here; 1. Mechanical Assembly - V2.1 Alex.
Can't find any reference to David Tingle on the web apart from SPAM. Ooznest have been using a tension system on the V2 workbee leadscrews for...
I believe there is a trial version of lightburn - worth checking that out before spending any money. Alex.
The answer (as with almost every question about configuring grbl) is here; gnea/grbl $5 = 1 for normally closed limit switches. Also see here;...
Never tried it but; [ATTACH] Alex.
Not familiar with the DQ542's - someone else will doubtless chip in with advice on those - but first check to see if you have any...
1) have a look at your $27 (pull off distance) setting. Increase it to (say) 10 - you can decrease it later if it solves the problem. 2) if that...
Export from Aspire as DXF, start a sketch in Fusion and insert dxf - expect it to take a while. SVG also worked, but scale was way off. Alex.
I tried svg (didn't work) and dxf - vectors laoded, but then I couldn't do anything with it. Why do you want to transfer from Aspire to Fusion? Alex.
Sorry, can't help with your main question, but can I advise you not to move your gantry by hand if that results in turning stepper motors while...
The "warning" is simply telling you that you didn't choose a work co-ordinate system in setup in Fusion so it's using the default of G54. Your...
What controller are you using with your workbee? Alex.
As @Peter Van Der Walt said, let us have a look at your g-code. Which post processor are you using with Fusion? - it should be this one if you are...
Ooznest have re-designed their Workbee now so the leadscrews (overlength) are under tension - bearings and lock collars on the outside. Tension is...
I have a workbee rather than a lead machine, but Ooznest recommend (for earlier versions of their machine) slackening the screws holding the Y end...
