Separate names with a comma.
Some features disabled for guests. Register Today.
What Gary said, but one thing not mentioned, which was why my belt drive got out of whack was a loose pulley on the motor shaft. One of the grub...
Follow the directions in this link: OpenBuilds CONTROL Software Contact me via PM if you have any problems.
There's couple of issues with your macro. Instead of fixing them, start over using the directions in this link: OpenBuilds CONTROL Software...
What David said but I believe its called "Allowance Offset" in Aspire. That's really the only thing that makes sense given he's tried different...
"But how do I make the tool start when I hit start job button? Then turn it off when the job is done?" You answered your own question within your...
Hey! Was that always there? I've never noticed that.
Power saving settings on your usb port more than likely. This is common and has been discussed around here quite a bit. Here's a thread that...
Here's the xpro wiki: Spark-Concepts/xPRO
They are basically the same except the workbee has custom plates. The lead uses standard OB parts so its easier to upgrade. They both can cut...
On the board, there are LEDS next to each axis. They are usually on when there is power to the motors. Based on your picture, it looks like...
The problem, as Peter has explained, "means your gcode was not obtained from Grbl compatible post processor or CAM software." What software are...
Mine flashes red when its connected. What does the serial console say? Any errors? Do your motors have power? It doesnt look like it.
You are welcome, though I'm willing to bet a beer that's not your problem. Good luck and let us know how it goes.
According to the ooznest site "For all Vectric Products use GRBL (mm) (*.g-code)" Sorry for the obvious question, but have you calibrated your...
The flip side of that is that the OP could have used google translate as well. Posting in English helps others who search for their issue before...
The Duet that Ooznest uses on their workbees can do it.
I copy all of my settings via the serial console and save to a text file every time I make an adjustment.
No. It has been suggested and rejected before: Multiple Custom Machines Profiles · Issue #74 · OpenBuilds/OpenBuilds-CONTROL
Yes, the motor drivers are in the blackbox. OpenBuilds BlackBox 4X Documentation Yes, it connects to your pc via usb. Yes it will work on...
I was typing my response when you posted about using a locating hole. If you find that the locating hole isnt working that well for you, perhaps...
