Separate names with a comma.
Some features disabled for guests. Register Today.
No whip at all. So far I've only done the Y axis. Z will stay with the default 8mm. Really need to get the X axis done. Check out my build...
Those nut blocks are the same ones I used. They fit fine. [IMG] I made a guide to drill mounting holes in the plates [IMG]
Break your job into multiple sections. I cant speak for anything but Fusion 360, but its easy to do with tool path containment.
Not possible with the OB Control.
Maybe another way around this is to add G55 at the end of your homing code?
Eeek. The way you've done it is fine. But here's a few suggestions. You can edit the post processor by going to the file itself. A pain to do...
@Peter Van Der Walt We got a problem. I cant reproduce, but I have a screenshot for you. The other day, @Blake Barr contacted me asking why the...
USB
You're not really giving us much to go on.
No, it doesnt matter. Once you have it built and wired up, if the X gantry moves opposite of what it should, just go into the grbl settings tab...
Assuming by "footprint" you mean the values in $130 and $131. If so why would you reduce? The error is saying that the moves in your gcode would...
Sounds to me that you have soft limits enabled and your machine size isnt set correctly in your grbl settings. Check out the settings here:...
What Peter said. When you tun on the power (using the power switch, not usb), 3 things should happen. The middle of the BlackBox logo should...
I run it on 3 different systems depending on where I am in the shop. I do most of my work on an HP i7-7700k with 16GB, SSD drives and NVIDIA...
Do you have your 24v pwr supply on? Its the switch on the power supply set to the correct AC voltage? Did you set $4=1 in the grbl config?
Install the drivers: Virtual COM Port Drivers
No problem. I've already cut a bunch of walnut with it. Way better than my 3FL spiral I was using.
NYC CNC has some recommendations on computers for Fusion. Any of them will run OB Control. What Computer to Buy for Fusion 360 - NYC CNC...
Setup a XYZ Touch Probe with a CNC xPro Controller At the bottom of the page there are two docs. One that explains the probe code and one that...
Read the "Run homing cycle" here. It should help you understand what's happening: gnea/grbl
