Separate names with a comma.
Some features disabled for guests. Register Today.
I2C bus? Alex.
Pleased to hear that, good luck with the rest of the re-build. Alex.
The symptoms are exactly what you would expect if the motors are wired incorrectly. I am assuming you either didn't get the motors from...
No, as @Peter Van Der Walt said, forget about homing for now. You need to set zero to tell your machine where the workpiece is. When you set up...
It's a question of balance - can the structure of the machine provide the rigidity to make use of the power of the high torque motors? Putting an...
Finding consensus in this hobby is about as likely as hens teeth :D:rolleyes: I'd agree with the others so far though, and add that if your...
Can you give us some more detail about your setup? Router or spindle? What limit switches? How have you arranged the wiring - mains or spindle...
Hi @BenBurnett, hopefully getting rid of the play in the Z axis will improve things. This by the way is a better place for support than a Facebook...
The homing cycle is a series of operations - high speed search to locate the homing switch - slow speed move to locate it more accurately - pull...
Sorry, you don't re-size an nc file. If you open it (any text editor - eg notepad) you will see it is a series of commands and step by step...
Or "daisy chain" them - as @Peter Van Der Walt said they need to be wired in parallel - so on each axis sig connected together, Plus together and...
Yes - my bad - I was actually looking at a copy of that post processor where I had commented out those M3 and M5's - apologies. Alex.
As @Gary Caruso said post a g-code file, and a Fusion file that has done this might be helpful. Alex.
Wiping contacts is a well established method to connect an otherwise isolated section of track - eg turntables. Indexing the various stations up...
As a fellow railway modeller (UK so 00 gauge) I will follow this with interest. Alex.
Next time I'm on my PC I'll make those changes and post the file here. It will have the .txt extension but will just need renaming with the .pp...
But he is using an Inventables X controller which I've never heard of (being new to this hobby) so I'll leave that bit to people who know what...
That makes perfect sense @dlhoulton. That post processor already has the M3 and M5 commands in the header and footer. They are prevented from...
Which post processor are you using with Vectric @dlhoulton ? Some of them already have those commands, but "commented out" (have a + sign in front...
Seems a bit over-complicated @Steveathome , I usually home machine, jog to workpiece origin (I normally use FRONT, LEFT, TOP so that I can use an...