Separate names with a comma.
Some features disabled for guests. Register Today.
90+ people have downloaded this since I designed it, so I guess there was some demand for it. Are any of the other 3d printed parts for the...
I would suspect EMI, keep your spindle leads well away from your low voltage wiring, especially if you are using simple normally open...
The files for the Arduino app are in the files and drawings tab above; https://openbuilds.com/attachments/embroiderynanov2-zip.40617/ Alex.
Nice one Colin! Alex.
Not sure of all details but leadscrew is under tension. Alex.
And a caution against making these machines too big. ;) Alex.
This should help @Rob Atha ; Setup a XYZ Touch Probe with a CNC xPro Controller At the bottom of the page there are two docs - 1 explains the...
As @Peter Van Der Walt said, but also if Duet what version of the firmware - big changes recently. Alex.
Fine for a few nibbles, but I'd want a deeper/bigger food tray :D:ROFL::D:p:rolleyes: Alex.
I don't actually have a blackbox (yet - planning another build one day) so I can only pass on what I have read others doing, but it should be...
Increase the pull-off distance slightly - $27. Alex.
Homing direction is a separate setting from direction switch - see; High Z Mod for Lead CNC You probably need to change the mask for $23. Alex.
The Y gantry plate operates the switch. Alex.
Tip:- if working without homing get in the habit of "parking" your machine close to the "home" position before switching off. Then, when you next...
Power supply is a separate purchase ; 24V Meanwell Power Supply Bundle I would be surprised if it couldn't handle your stepper motors, but see if...
BlackBox Motion Control System Alex.
It will probably say Atmega328 (or Atmega2560) the number and any letters after it might matter if you decide to try re-flashing with an earlier...
I couldn't see from your pic - see if you can determine exactly what chip you have on that board. Re-flashing grbl can be a problem with some chip...
Stretching my grbl expertise to breaking point with that @Ron Smith - I see you disabled hard limits which I was going to suggest. I'll tag @Peter...
A (well built) leadscrew machine using V-slot should be capable of +/- 0.1mm which is certainly accurate enough for woodwork projects and probably...