Separate names with a comma.
Some features disabled for guests. Register Today.
It does not.
Its no worry, you can keep going here (still related after all, and helps to see your other history at a glance) But for future reference,...
a "p1000" in there, not Grbl Compatible Gcode. You maybe added something in in CAM > Settings tab > Settings button > Advanced that doesn't...
Runs a webserver for remote access from any other device on the LAN (go type the PC where it's running IP port 3000 into any other PC or device on...
Post the Workspace (Project) or gcode for review
Normally not needed, when you add the toolpath it pops up the same window. You mustve Cancelled that window without doing the setup, for it to be...
You didn't setup the toolpath at all. Edit it and tell it what to do [ATTACH]
From here we can't see either. At the machine, close up inspection. Partial disassembly if it has to. You are the only person at it, who can see...
Checkout the Builds section 3D PRINTER BUILDS | OpenBuilds for inspiration
Either is fine (:
Cuts off the header... Hard to review Partials like this. Just post the file completely as a attachment (next time). When we want to review your...
Depending on the source (quality brand vs ebay for example) it might be. Are the shafts chromed? (If not bearings might be fine but wearing slots...
When its hanging LED on, but should not be Triggered. Use the Profile provided (: There is, but ... But that's not it. Not the source of your...
Lighting up in CONTROL. Yes. Triggered when the tip pushes up and releases switch During the downward probe, tip hits, float starts floating,...
If you measure distance between Y rails, is front and rear consistent? Not maybe a little Trapezoidal shape to the frame - with rear or front a...
[ATTACH] Also check how you mounted the Z-switch, Should hit the roller, here its already lit up and the screw is pressing on your lever's hinge...
Ahh ok so its its the Plasma Add on! As you were changing settings manually etc in the first post I kinda assumed it was a self-built machine OK...
If you rotate the design 180deg, does the position stay relevative to the drawing, or to the frame? If the inconsistency is in the same spot...
That depends how you mounted the switch. Dr D flo has it like yours. Ours allows more float. Ours rests on the switch while tip is up in the air...
Beta post processor available at GitHub - OpenBuilds/OpenBuilds-MeshCAM-Postprocessor: Post Processor for MeshCAM for use with OpenBuilds Machines...