Separate names with a comma.
Some features disabled for guests. Register Today.
You got a Z limit error on a Probe. Sounds like you have your Probe switch plugged into your Z Limit input instead of the Probe port? Or your...
What kind of machine did you use as a base? LEAD1010? (Easy option, use the Add-on ) What CAM are you using? If its OpenBuildsCONTROL - check...
Homing sets G53. Your jogging+SetZero (Or XYZ probing) sets Work Coordinates docs:software:openbuilds-control [OpenBuilds Documentation] (Section...
The visible symptoms show the pen moving off the intended path. Something is moving. How's the pen mounted? (Pics of pen mount?)
There are a lot of subtle differences - different motor mounts, different leadscrew system (tension vs compression), different lengths leadscrews...
No i mean as values, we either do $22=0 (OFF) or $22=1 (ON) typically.
It's a Laser CAM. So not really its intended use Well, you get which says it is Which error? But use a Grbl host (CONTROL, UGS, etc - let it...
They will have very high inductance in series - will be incredibly slow. Would say try parallel, and if they are too weak, swop them for motors...
Or get some nice DQ542MA drivers? Much better than DRVs, nice screw terminals all round. Protected in a case with a big heatsink
Also see Tramming: A generic guideline
Aren't you connected over USB cable? (Not sure why you mentioned Wifi) Anything changed recently? Worked on wiring? Anything at all that might...
You need the proper original Grbl
Enter $$=22 for example into the Serial Terminal, grblhal will output the Help for that command [ATTACH] (TIP: Only 1 and 0 is typically used...
Check with the store via Support > New Ticket for a list of official resellers and more info on reseller's versions of core machine designs.
I'd say get the LEAD1515. While a 1010 covers your current needs, you'll soon find work for the larger bed! Modifications are possible, but...
Not with an Arduino. Thats for 3rd party boards like STM32s etc that can't autoreset Can give it a short just doubtful it would change anything...
Did you close the other apps that "can" connect (access denied means its still connected or owned by another application)
OK that clarifies (: hard to figure out the exact issue at hand sometimes from shorter descriptions So keep PROBEZ.PRB (and Probe Menu) for our...
Sounds more like a wiring issue than a firmware relations :) Use the Troubleshooting tab in CONTROL to test your probe (touch magnet to plate)...
Interface is really more of a CNC controller, but if you can add a PC running CONTROL, that's possible with Getting started with Javascript Macros...