Separate names with a comma.
Some features disabled for guests. Register Today.
Its possible but its unsupported. There are a few of us working out some issues with it, but its not ready from prime-time. I would also suggest...
I just went through the steps I gave you. I exacted the files to my desktop like you have done. The extract will create two levels of...
I think you need to go one more level deeper. c:\.....\GRBL-Post-Processor-Master\GRBL-Post-Processor-Master. Basically, you need to select the...
No you dont
Here are the steps: Go here: swarfer/GRBL-Post-Processor Click on the big green download button. Click on download zip. Unzip the file....
Here ya go: How to install a Personal (local) Post Processor in Fusion 360 CAM | Fusion 360 | Autodesk Knowledge Network
Right arrow has been fixed, but you need to remap: OpenBuilds CONTROL Software On the second issue. @Peter Van Der Walt can speak to this...
BB can only be connected to 24V. NEMA17s from the OB store are fine. You'll probably have to adjust the current on the motor drivers down using...
Thanks for the explanation Peter. Still learning. :)
Interesting. It doesnt start the job, but it will resume a paused job. While job is running is wont pause a job. @Peter Van Der Walt what say ye?
Make sure your jumpers are set correctly: OpenBuilds BlackBox 4X Documentation You also need to send an S command with M3. ie. M3 S1000
Does this help?: My DRO's read negative dimensions when the table moving in positive directions.
Yes, its DC. I'm not sure of the voltage and its not listed in the docs. The IOT relay for us 110 folks takes a 3-48VDC signal so its somewhere...
I havent used Mach3, but do the DROs show machine coordinates or work coordinates. If they show work coordinates, then most likely its completely...
99% sure its backlash. Loose motor couplers, worn anti-backlash nuts and loose lock collars can cause this.
Its not just 10 lbs. You need to add the weight of the plates, motor, wheels, screws, spacers, lead screw, etc. The 10lb spindle is probably dry...
Not exactly what you want, but if you use OB control, you can use the jog widget on your phone. You'd still need the tablet connected via USB....
The official way: Spark-Concepts/xPRO
Yep. Thought that was clear by the image so I didnt mention it. Sorry.
I try to send support issues over here. Its much easier here than FB. But everyone has their preference I suppose.