Separate names with a comma.
Some features disabled for guests. Register Today.
@Chadfarmer and @Jacob Lotter have custom plates on their machines now. Maybe they will want to sell them. If not, make your own or contact...
He indicated on the FB page that it ended up being a loose wire.
OB Control has a profile for the Workbee. Load it and make sure you set $4 to 1. Save to Firmware, then go through the calibration wizard (in...
Try adusting the current via the trim pots
Oh. Didnt realize. Well, its easy enough to test with a multimeter or using OB Control's troubleshooting tab. :)
The labels are on the board. Are you missing that board as well? [IMG]
I'm happy. As long as you dont expect it to be as fast as a desktop/laptop, then you'll be happy. I only use it to run OB control. Keep in...
You'll be fine. Hit me up if you haven any fusion to grbl issues/questions.
Cant see the current rating :)
Whats more important than the machine model is the motors you are using on that machine. If you have OB motors, you're good. If not, check the...
In the pictures above, do you have your usb cable plugged into the box and the computer? The usb icon should light up when it is. Device mgr...
Did you install the ftdi drivers? OpenBuilds BlackBox 4X Documentation
Yes and Yes. There's a guy selling 1" taller Y plates on ebay. You can also lower your wasteboard. You can even change you Z axis: Ideas to...
Sorry. DRO = Digital Readout. The boxes that tell you where you are. See image below. According to your gcode, it should start cutting -1mm...
The other thing to consider is EMI. I've had my machine do whacky things because of it.
All jobs start by raising the spindle to -10mm below machine Z0. That's good and normal (as long as you have clearance for it). The Fusion file...
I wonder what this means in the latest release notes for the Ooznest firmware " Fixed homing files to remove restricted movement due to steps/mm...
Oh. OK. I dont use the jog widget.
I just tested and my jog widget defaulted to inch mode (I remember the main app doing that as well when inch mode was first implemented) even...
Sounds like a cool project, but the router forum isn't the best place to be. I did find this build where you might be able to draw (pun intended)...