Separate names with a comma.
Some features disabled for guests. Register Today.
Any chance the compressor tank had trained during the nicer bit, then kicked in the compressor to run - while it was making the choppier bit?...
CONTROL > Grbl Settings tab > Scroll down to $111 Max Rate for the Y axis. Change value. Save and Reset when prompted Grbl v1.1 Configuration
Our Acros runs around that low too (high speed belt drives) OpenBuilds-CONTROL/app/js/grbl-settings-defaults.js at...
Great then finally the drivers are fine. If it can read the ID then finally the drivers are no longer the issue. Back at Blackbox X32 - Driver...
What are you changing? Ps, for steps per mm, forget decimals. Its Steps per mm. Step being the lowest physical increment the machine can move....
Does it show as NodeMCU in CONTROL yet? Latest Device Manager screenshots shows the right device name at least PS: With all these things ONCE is...
Feedrate = speed of the move = set in CAM It should pierce on the entry of an entity only. But now that you mention it - are you sure you have...
Could also be feedrate (moving too slow - blows away too much material below nozzle) or air pressure related cnc plasma arc extinguishing - Google...
So our typical recommendation is to use a floating head with draggable consumables. Wrong consumables can "blow out" the arc if dragged on the...
(; Seem to "work around" more like it. The short is still present and someday could cause mains leaking into the DC domain damaging controllers,...
It doesn't stall in this video But the leadscrew sounds dry - spray some Dry/PTFE lubricant (Don't use oil it will degrade the Delrin nutblock)...
What kind of Inverter, and what kind of Nozzles do you use? (Blowback with Draggable tips?)
:) something with an FTDI would have been a better test (;
I think we asked before, but just double checking. These are genuine Arduino's (TM) - not ebay specials (might not have standard firmware on the...
Means, you gotta poke around there - you' re the only person at the machine - only one that can look and feel and inspect. You may need to take...
Or somewhere else, as yours isn't signed. The installer version IS signed Its so simple, if you just please follow what I tell you 1)...
Random settings string in the connection handshake is weird too. Only that mac at hand? Curious if its Mac's Arduino USB driver (mac ftdi driver...
Close visual inspection, perhaps partial teardown.
Yes, if USB is still providing power
