Separate names with a comma.
Some features disabled for guests. Register Today.
This is the post processor for Fusion 360/Duet https://ooznest.co.uk/wp-content/uploads/2019/02/Fusion-v1.0.1.zip How to install it here;...
Hi @maxhill, This line in your config file is where you set the steps/mm if they need changing M92 X400 Y53.334 Z400 ; Set steps per...
The main thing I need to know is what version of Oozenest's firmware you are using (I assume it is V1. 06). Please don't use the beta version 1.07...
If it stops sometimes and reverses sometimes the first thing to check is your wiring - one loose wire or bad connection causes those symptoms. If...
Hi @jeffmorris, if you don't want to design a jig yourself I would be happy to help if you give me a dimensioned plan of your sander table, the...
Hi @jeffmorris, I made a jig for jobs like that. My pillar drill has two slots in the table so bottom of jig has bolts protruding so it will slide...
As @Peter Van Der Walt said Openbuilds cannot give advice on wiring mains. If you fried your electrics (or yourself) Openbuilds could be liable....
We need more info to help with this. What machine - belt or screw drive? What controller electronics and control software? Look for loose...
No need to shout :). What machine, controller and control software? Alex.
One way is to use drop-in T nuts. Recess the bolt head into the top surface of the spoil board, getting the depth of the recess and bolt length...
Yes - loosen screws holding end plates and any angle brackets, pull the framework back into square, re-tighten all the fixings. It might help to...
Hi @Zeph, I'm anticipating questions grbl experts are going to ask - what are your grbl settings? What controller are you using? This thread might...
Benjamin bought his machine from Ooznest. I am sure if the belts are the problem Ryan would be happy to replace them. Alex.
After you pointed out my error on the blackbox :oops: I re-read your post more carefully. You said you started with an Ox mechanical kit. Did that...
This might be useful - it's a guide for a 1/4" bit in a variety of materials, but doesn't say what sort of bit! Also has the dial settings for...
On my phone so not so easy to give you direct links. Search "tramming" (magnifying glass) for discussions on adjusting the alignment of your...
I'm not qualified to give a definitive answer - the exact details would depend on the regulations where you are, but a word of caution - what you...
You can use Reducing Collet Adapter 1/4" to 1/8" to fit 1/8" bits. Alex. Thanks to the mod who edited this - didn't know OB did this -Alex.
Just to confirm what @Rob Taylor said about the backlash - if @Benjamin Vg followed the video and went from 0 to 100, 100 to 200, 200 to 300 etc...
What thickness of plywood are you using @jeffmorris? (to give me an idea of the scale you are working to). I use 3mm and 6mm mdf for making model...
