Separate names with a comma.
Some features disabled for guests. Register Today.
docs:blackbox-x32:faq-emi [OpenBuilds Documentation]
Possibly, depends on the electrical specs of the motors. Try look for a datasheet of yours
Depends. If the machine is orientated where its possible, and its heavy, and not counterbalanced, yes.
The onscreen alarm tells you exactly why it entered lockout. Read the 2nd part of the error too Question is did it actually hit, or was it a...
Honestly you'll never need to do that. Not worth the learning curve. Plus grbl is a dead retired project. If you wanted to learn new skills get a...
Confirms your settings is wrong. Load them, from CONTROL 1.0.370 > Grbl Settings tab > Select machine from the list > Save and reset when prompted...
Last try from my side: What version of CONTROL are you on? And Remember to post the backup for review
Yes, Our profiles sets key values for you. If loaded (and if loaded from a current version of CONTROL. Sure you were on V1.0.370? Sure you...
Yes, the Arduino workflow is Compile: Compiling Grbl Wrong ZIP Compiling Grbl shows the green button on the front page (:
Sounds like you DIDN'T load the machine profile (: (CONTROL > Grbl Settings tab > Select machine from the List > Save and Reset when prompted)...
By the naming you forgot to unzip and rename, or downloaded the Release instead of the Source. Regardless: See Flashing Grbl to an Arduino though...
Unless you meant Homing Directions (Thats in $23 Homing Dir)
You can disable the motors on Idle: Grbl v1.1 Configuration
Are you using the correct Post Processor yet? Please post a Grbl Settings backup for review too? (CONTROL > Grbl Settings tab > Backup Settings...
First checkout docs:blackbox-x32:faq-emi [OpenBuilds Documentation] That or Live/Neutral swopped. Best to get an Electrician in to check the...
You can change those to whatever you need it to be. Z up first is good practice (safety - get tool up and clear of work / hands / clamps / etc...
Post a Grbl Settings backup for review (CONTROL > Grbl Settings tab > Backup Settings button)
If he has the firmware, he likely had their software too. That message can't (likely) come from Firmware, so I am still betting on a API process...
No, and you are quite welcome to verify that for yourself : github.com/OpenBuilds/OpenBuilds-CONTROL
Is that other app still running on your PC? It comes up right after the API call in the log, so if its still running you were talking to it, not...