Separate names with a comma.
Some features disabled for guests. Register Today.
If you make a video of the stall we can see if we see/hear anything to give you more clues Tight is technically wrong. Just touching is correct....
Does the Fault LED light up? docs:blackbox-x32:currentadjustment [OpenBuilds Documentation] or does the lockup feel mechanical (Binding)? - check...
The nuts should just take out backlash, not excert pressure [MEDIA] The high pitched noise is called stalling, could be caused by binding (could...
No affiliation, just a personal fan: Drag Knife for CNC router
Use the installer! Stop with the INF, update driver and other uncalled for steps. No where in this thread, our documentation or Silabs...
Going to need to see the Workspace Export (OBC) from File > Export Workspace to help you see what you have done to see what might be wrong...
Yes and ran without error for me
EEPROM reset, then reflash Grbl from CONTROL > Wizards and Tools > Firmware flashing tool > BlackBox 4X tab. The goto Grbl Settings tab > Select...
I was reporting on MY actions. Was busy setting up to run your test. I was wiring up a temp probe (; See my reply after that too
Right with Check mode off, testrectangle4.gcode ran fine, with me manually shorting the probe on the G38 lines. Ran in about 2min [ATTACH] (The...
Disabling check and wiring a temp probe (or the probe lines will error) will revert
Understood, but nice for a comparison. https://openbuilds.com/attachments/testrectangle4-gcode.60203/ Ran fine (in check mode) to a BlackBox...
I think we're all waiting for your Guage pin to come in so you can report back if probing more accurately (and with your understanding regarding...
That Grbl Wiki is sometimes a good read - not be skipped Grbl v1.1 Configuration and all other pages of the same Wiki [ATTACH]
Last minute thought: You are remembering to RESET (reboots the BlackBox) after applying a calibration change. Before testing and retrying...
Ran it through a BlackBox with Check mode Grbl v1.1 Commands enabled no issues (Also not near machine) [ATTACH]
Yes but which USB chip. FTDI, Silabs, CH340 or ATMEGA8U2 Or closeup pictures of the board / USB device info from OS
Something else I am thinking of, what USB chip is your controllers using? (If its not a BlackBox)
That's March 4th, and was already analysed: Thus, post the new stuff too...
Post your files too - greatly cuts down on "lets see your latest files" question having to be bounced back - the more you include (logs, fusion...